Patit Paban Kundu - Department of Chemical Engineering,Indian Institute of Technology Roorkee
Patit Paban Kundu
Patit Paban Kundu Professor patit.kundu@ch.iitr.ac.in 7251040403 Website
Areas of Interest
  • Fuel cells (Direct methanol fuel cell, microbial fuel cell), Waste management, Protein delivery, Catalaysts for fuel cells, Membranes for fuel cell,Polymer recycling and biodegradation, Tissue Engg
Multiple Posts
FromPeriodPositionOrganisation
2016-05-03OngoingProfessorDepartment of Chemical Engineering, Indian Institute of Technology, Roorkee
2008-09-297 years 7 months 3 daysProfessorDepartment of Polymer Sc & Technolohy, Universiry of Calcutta
2010-11-021 year 11 months 30 daysProfessor & HeadDepartment of Polymer Sc & Technology, University of Calcutta
2009-04-018 months Professor-in-charge, Training and PlacementUniversity of Calcutta
2007-03-051 year 6 months 23 daysProfessorDepartment of Chemical Technology, SLIET, Longowal
2005-04-012 years 11 months 30 daysHead, Department of Chemical TechnologySLIET, Longowal
2004-09-011 year 2 months Coordinator/Head, Department of Disability Studies (formerly Person with Disability Scheme, MHRD)SLIET, Longowal
1999-03-057 years 11 months 27 daysAssistant ProfessorDepartment of Chemical Technology, SLIET, Longowal
1996-10-012 years 5 months LecturerDepartment of Chemical Technology, SLIET, Longowal
Honors and Awards
AwardInstituteYear
Post doctoral FellowshipInha University, South Korea2001
Post doctroral FellowshipIowa State University, USA2003
Post Doc FellowshipYonsei University, South Korea2006
CSIR-SRFCSIR1994
GATEGATE-MHRD1990
Educational Details
DegreeSubjectUniversityYear
B. Sc (Hons)Chemistry (Honours)University of Calcutta1986
B. Tech.Plastics and Rubber Technology (Presently Polymer Sc & Technology)University of Calcutta1989
M. Tech.Plastics and Rubber Technology (Presently Polymer Sc & Technology)University of Calcutta1992
Ph.D.Polymer Sc. & TechnologyI. I. T. Kharagpur1997
Sponsored Research Projects
TopicFunding AgencyStart DatePeriod
Development of Anti microbial Polymeric Nanocomposite Film from PET waste for Packaging of Milk and Milk ProductMinistry of Food Processing Industries, New Delhi (Govt. of India)2013-022 years 9 months
Microbial Synthesis of Copolymers of Polyhydroxybutyroate from Waste Cooked Oil for Biomedical ApplicationsCSIR, New Delhi2012-01-012 years 11 months
Synthesis of Derivatives of Chitosan and Their IPNs for oral insulin DeliveryDST, Govt. of West Bengal2012-12-012 years 11 months 29 days
Modernization of Polymer Characterization Laboratory in the area of Polymer BiodegradationAICTE, New Delhi2013-04-011 year 11 months 30 days
Development of High Performance Direct Methanol Fuel CellMinistry of New and Renewable Energy (MNRE), GOI2010-10-013 years 11 months 29 days
DST-FISTDST, New delhi2012-04-014 years 11 months 30 days
UGC-SAP; Polymer Nanotechnology: PET nanocompositeUGC, New delhi2012-10-014 years 5 months 30 days
Production of Bioelectricity from Sludge and Domestic wastewater using Microbial Fuel CellMinistry of Environment and Forests (GOI)2009-11-015 years 4 months 30 days
Development of Elastomers from Vegetable Oils and Vibration damping Characterization through a fabricated machineUGC New Delhi2009-04-012 years 11 months 30 days
Modified Chitosan as Nonviral vector in Gene therapyAICTE, New Delhi2010-04-011 year 11 months 30 days
Design and Development of Bridge Bearing based on Metal Reinforced RubbersCSIR, New Delhi1997-11-011 year 11 months 30 days
Development of PET waste based Polyurethanes and its modeling studiesMHRD, New Delhi1997-07-013 years 5 months 30 days
Development of Novel Microporous Polyolefin Films for Disposable DiaperCSIR, New Delhi2005-04-012 years 11 months 30 days
Modernization of Polymer Characterization Laboratory in the area of Polymer BiodegradationAICTE, New Delhi2011-04-011 year 11 months 30 days
Delivery of Antisense oligonucleotides (ASO) to the androgen receptor of prostate cancer cells by nanoparticlesUniversity of Calcutta- NanoTechnology and NanoScience Center2010-04-012 years 11 months 30 days
Modified Chitosan as nonviral vector in gene therapyNanoscience and Nanotechnology Center, University of Calcutta2009-04-012 years 11 months 30 days
Polymeric nanocomposites as Membrane for application in Microbial Fuel CellIIT Roorkee- FIG grant2016-11-011 year 11 months 30 days
Proposal for the Development of Biodegradable woven PP/HDPE bags for packaging of 50 Kg of CementJSW Cement, Mumbai2020-02-01Ongoing
Teaching Engagements
TitleCourse CodeClass NameSemester
Polymer BlendsPEN 203Polymer Science EngineeringAutumn
Particle & Fluid TechnologyCHN211B. Tech (Polymer Sc & Engg) 3rd SemAutumn
Mechanical OperationCHE 301B. Tech. Chemical Engg, 3rd SemAutumn
Novel Separation TechniquesCHN-413B. Tech Chemical Engg 8th SemSpring
Novel Separation TechniquesCHN 574M. Tech.Spring
Research Scholar Groups
Scholar NameInterest
Moumita KhamraiSynthesis of Microbial Cellulose for Biomedical Applications
Prasanata PattanayakMicrobial Fuel Cell
Farhan PapiyaMicrobial Fuel Cell
Amandeep SinghPolymers and their composties for food packaging
Ruchira RudraLow cost Polymeric Menmbranes in Microbial Fuel Cell
Amit ChaturvediMicrobial Fuel cell
Simran Kaur DhillonNitrogen and metal doped Carbon for application microbial fuel cell
PHDs Supervised
TopicScholar NameStatus of PHDRegistration Date
Chitosan Hydrogels for Modulated Drug Delivery and its modelingKamlesh KumariA2004-06
Synthesis of Linseed oil based Polymers and their NanocompositesVinay SharmaA2004-11
Mesoporous Methylcellulose for controlled Hormone and Fertilizer ReleaseRatan Pal SinghA2008-03
Study and Evaluation of Electrolysis as a treatment option for non-sulphur black liquorHimadri Roy GhatakA2008-01
Nanocomposite from Depolymerized PET Waste for Food Packaging ApplicationSunain KatochA2005-04
Development of low cost MEA for DMFC: Studies on PVdF, its copolymers and blends as PEM; and transitSuparna DasA2014-02
Microbial degradation of PolyethyleneShritama MukherjeeA2014-02
Synthesis of Polyurethane from PET waste and its application in controlled protein deliveryAditi BhattacharyaA2014-04
Development of Fluorinated polymeric membranes for application in microbial fuel cellVikash KumarA2011-01
Development of polymeric electrolyte membranes and analysis of different operating parameters to impPiyush KumarA2013-01
Synthesis of Polyaniline and Sulfonated Polyaniline, and Their Application in Direct Methanol Fuel CKIngshuk DuttaA2014-01
Modified Chitosan as non-viral vector in Gene TherapyKishor SarkarA2008-12
Analysis of system parameters for bio- electricity generation from microbial fuel cellArpita NandyA2012-10
Microbial Synthesis of Polyhydroxyalkanoates from waste carbon sources for biomedical applicationsNilkamal PramanickA2014-03
Development of Bioactive Polymer/ Hydroxyapatite Nanocomposites for Bone Tissue EngineeringArundhati BhowmickA2013-10
Oral Delivery of Encapsulated Insulin with Modified ChitosanPiyasi MukhopadhayayA2012-10
Development of Elastomers From Linseed oil And Vibration Damping Characterization Through a FabricatRakesh DasA2010-11
Microbial synthesis of cellulose and their derivatives for biomedical applicationMoumita KhamraiO2016-11
Development of cost effective catalyst for DMFC: studies on transition metal based alloy supported oPrasanta PattanayakO2016-02
Development of novel membrane electrode assembly: synthesis of modified polybenzimidazole compositesFarhan PapiyaO2016-01
Development of antimicrobial polymeric nanocomposite film from PET waste for packaging of food produAmandeep SinghO2015-12
Development Of Non-Fluorinated Cation Exchange Membrane For Application In Microbial Fuel CellRuchira RudraO2016-06
Visits to outside institutions
Institute VisitedPurpose of VisitDate
University of Camerino, ItalyInternational Indo-Italian workshop on energy for three days2018-09-16
University of CambridgeExecutive management programme as part of LEAP programme of MHRD to train in the leadership for a week.2020-01-16
Yonsei Medical School, Yonsei University, South KoreaInvited talk2007-12-21
National International Collaboration
TopicOrganisation
MicrobiologyCLRI
PhysiologyUniversity of Calcutta
BiotechnologyUniversity of Calcutta
Books Authored

Book Written by  Professor P. P. Kundu

  1. Kundu, Patit Paban and Datta, Kingshuk (editors): A book entitledProgress and Recent Trends in Microbial Fuel Cells” 1st edition, 9 th June, 2018; published by Elsevier Science (UK), eBook ISBN: 9780444640185; Paperback ISBN: 9780444640178.

Book Chapters written by Professor P. P. Kundu

  1. Laha, Soumita; Dutta, Kingshuk; Kundu, P. P. (2018): Chapter 14 on “Biodegradation of Low density Polyethylene films” in the book “Handbook of research on microbial tools for environmental waste management” edited by Vinay Mohan Pathak and Navneet (IGI Global); Release Date: April, 2018; Pages: 496; ISBN13: 9781522535409, ISBN10: 1522535403, EISBN13: 9781522535416; DOI: 10.4018/978-1-5225-3540-9
  2.  Rudra, Ruchira; Kumar, Vikash; Nandy, Arpita;  Kundu, Patit Paban (2018): Performances of separator and membrane –less MFC in the book entitled "Microbial fuel cell: A bioelectrochemical system that converts waste to watts"  published by M/s. Capital Publishing Company, India and M/s. Springer, Switzerland; ISBN 978-3-319-66793-5.
  3. Kundu, P. P. and Mondal, S. (2016): Polybenzimidazole as Membrane in Direct Methanol Fuel Cell in “Novel Applications in Polymers and Its Waste Management”, Editors: Badal Jageshwar Prasad Dewangan, Maheshkumar Narsingrao Yenkie, Apple Academic Press (USA). Hard ISBN: 9781771884754, E-Book ISBN: 9781771884761.
  4.  Chatterjee, Abhipriya and Kundu, Patit Paban (2016): The Therapeutic Role of the Components of Aloe Vera in Activating the Factors that Induce Osteoarthritic Joint Remodeling in Novel Applications in Polymers and Its Waste Management”, Editors: Badal Jageshwar Prasad Dewangan, Maheshkumar Narsingrao Yenkie, Apple Academic Press (USA), Hard ISBN: 9781771884754, E-Book ISBN: 9781771884761.
  5. Kundu, Patit Paban; Dutta, Kingshuk (2015): Current status of Hydrogen fuel Cell for portable application, Compendium of hydrogen energy Vol 4 (ed. Ball et al.), WoodHead Publishers, USA.
  6. Dutta, Kingshuk; Kundu, Patit Paban; Kundu, Arunabha (2014): Fuel cells – exploratory fuel cells: Micro-fuel cells in “Chemistry, Molecular Sciences and Chemical Engineering” Edited by Jan Reedijk, Elsevier Publisher, UK.
  7. Kundu, Patit P. and Sarkar, Kishor (2011): Natural Polymric Vectors in Gene Therapy in “Biopolymers: Biomedical and Environmental Applications” Edited by Sushel Kalia and Luc Averous, John Wiley and Sons, USA.
  8. Kundu, P. P.; Sharma, Vinay; Kumari, Kamlesh (2011): Chitosan copolymers and IPNs for controlled drug delivery in “In Chitosan: Manufacture, Properties, and Usage”, Nova Science Publishers, Inc.
  9. Bhowmick, Arundhuti; Banerjee, Subhas; Kundu, P. P. (2013): Chapter 197 entitled “Hydroxyapatite packed chitosan-PMMA nano-composite: a promising material for construction of synthetic bone”, in the book “Multifaceted  Development and Applications of Biopolymers towards Biology, Biomedical and Nanotechnology”, edited by Pradip Dutta and Joydip Dutta (Springer, USA).
  10. Kundu, P. P.; Nandy, Arpita; Mukherjee, Amrita; Pramanick, Nilkamal (2013): chapter entitled “Microbial Synthesis of Polyhydroxyalkanoates and its Biomedical Applications”, Encyclopaedia on Biomedical Polymers and Polymeric Biomaterials (Taylor and Francis, USA).
Refereed Journal Papers

 

 

List of Publications of Professor P. P. Kundu

 

Two Hundred research papers have been published in international journals of repute (with 603 total impact factors and around 5057 total citations with present H-Index of 36, i10 index of 130). 

 

Numbers of published papers with Impact Factor between 3 and 5       : 55

Numbers of published papers with Impact Factor more than 5              : 38

 

Year 2020 (Seven Publications)

 

1.   Richhariya, G.; Dora, D.T.K, Parmar, K.R.; Pant, K. K.;  Singhal, N.;  Lal, K. and P.P. Kundu (2020): Development of Self-Healing Cement Slurry through the Incorporation of Dual-Encapsulated Polyacrylamide for the Prevention of Water Ingress in Oil Well, Materials (MDPI Publications, IF 2.65), 13(13), 2921; https://doi.org/10.3390/ma13132921.

2. Khan, Sarim; Chockalingam, Sankarakuttalam; Kundu, Patit P.; Packirisamy, Gopinath(2020):  Fabrication of bimodal porous scaffold with enhanced mechanical properties using silanized sisal fibers for potential application in bone tissue engineering, Materials Today Communications (Elsevier Sc, UK, IF 4.9), Publication date 2020/5/31.

3. Singh, Amandeep; Banerjee, Sovan Lal; Dhiman, Vandana; Bhadada, Sanjay Kumar; Priyatosh Sarkar, Khamrai, Moumita;  Kumari, Kamlesh; Kundu, Patit Paban:  Fabrication of calcium hydroxyapatite incorporated Polyurethane-Graphene oxide Nanocomposite porous Scaffolds from Poly(ethyleneterephthalate) Waste: A Green Route toward Bone Tissue Engineering, Polymer (Elsevier Sc, UK, IF 3.8). In Press.

4. Khan, Sarim; Garg, Muskan; Chockalingam, S.; Gopinath, P.; Kundu, Patit Paban (2020): TiO2 doped chitosan/poly (vinyl alcohol) nanocomposite film with enhanced mechanical properties for application in bone tissue regeneration, International Journal of Biological Macromolecules (Elsevier Sc, UK, IF 4.9), 143, P 285-296.

5. Papiya, Farhan;  Pattanayak, Prasanta;  Kumar, Vikash; Das, Suparna; Kundu Patit Paban (2020):  Sulfonated graphene oxide and titanium dioxide coated with nanostructured polyaniline nanocomposites as an efficient cathode catalyst in microbial fuel cells, Materials Science and Engineering: C (Elsevier Publications, IF 4.9), 08, 110498.

6. Das, Suparna; Dutta, Kingshuk; Enotiadis, Apostolos; Papiya, Farhan;  Kundu, Patit Paban Bhattacharyya, Swapan Kumar; Giannelis, Emmanuel P. (2020): Nanorods of cerium oxide as an improved electrocatalyst for enhanced oxygen reduction in single-chambered microbial biofuel cells, Material Research Express (IOP publications),   7, 015514. https://doi.org/10.1088/2053-1591/ab653e.

7. Pattanayak, Prasanta; Pramanik, Nilkamal;  Papiya, Farhan; Kumar, Vikash; Kundu, Patit Paban (2020): Metal-free keratin modified poly (pyrrole-co-aniline)-reduced graphene oxide based nanocomposite materials: A promising cathode catalyst in microbial fuel cell application, 8/ 3, June 2020, 103813; https://doi.org/10.1016/j.jece.2020.103813

 

Year 2019 (Nine Publications)

8. Khan, Sarim; Kumar, Viney; Roy, Partha;  Kundu, Patit Paban (2019):  TiO2 doped chitosan/hydroxyapatite/halloysite nanotube membranes with enhanced mechanical properties and osteoblast-like cell response for application in bone tissue engineering, RSC Advances (Royal Chemical Society, UK, IF 3.0), 9,  39768-39779.

9.      Papiya, Farhan; Das, Suparna; Pattanayak, Prasanta; Nessim, Gilbert Daniel; Kundu, P. P. (2019): The fabrication of silane-modified graphene oxide-supported Ni-Co bimetallic electrocatalysts: a catalytic system for superior oxygen reduction in microbial fuel cells, International Journal of Hydrogen Energy, (Elsevier Sc, I.F. 4.2), 44 (47), 25874-25893.

10.  Singh, Ratan Pal; Kundu P. P. (2019): Studies on Rheological, Thermal and Morphological Properties of Methylcellulose Gel in Aqueous Medium, Polymer Engineering & Science Wiley & Sons, IF 1.9), 59/10, 2024-2031. DOI: 10.1002/pen.25202.

11. Pramanik, Nilkamal; Rath, Tanmoy; De, Jiban Krisnha; Adhikary, Arghya; Basu, Ranjan Kumar; Kundu, Patit Paban (2019): Polyhydroxybutyrate-co-hydroxyvalerate copolymer modified graphite oxide based 3D scaffold for tissue engineering application, Materials Science and Engineering- C (Elsevier Sc, UK, IF 4.9), 94, 534-546. https://doi.org/10.1016/j.msec.2018.10.009.

12.  Kumar, Deepak; Pandey, Jyoti; Khan, Nidha, Kumar, Pramendra and Kundu, P. P. (2019): Synthesize and characterization of binary grafted psyllium for removing toxic mercury (II) ions from aqueous solution, Materials Science and Engineering- C (Elsevier Sc, UK, IF 4.9), 104, 109900-109908.

13.  Khamrai, Moumita; Banerjee, Sovan Lal; Paul, Saikat; Ghosh, Anup Kumar; Sarkar, Priyatosh; Kundu, Patit P.  (2019): Dopamine Modified Bacterial Cellulose/rGO/Ag NPs Based Mussel Mimetic Bio-adhesive Antimicrobial Patch: A Green Approach towards Wound Healing Application, ACS Sustainable Chemistry & Engineering (ACS, USA; IF 6.1), 7, 12083−12097.

14.  Pattanayak, P.; Papiya, Farhan; Pramanik, N. and  Kundu, P. P.  (2019): Deposition of Ni–NiO nanoparticles on the reduced graphene oxide filled polypyrrole: evaluation as cathode catalyst in microbial fuel cells, Sustainable Energy & Fuels (RSC, UK; IF 4.9), 3,1808–1826. DOI: 10.1039/c9se00055k.

15.  Nandy, Arpita; Jana, Samir; Moumita, Khamrai; Kumar, Vikash; Shritama, Mukherjee Arindam, Bhattacharyya; Kundu, Patit P. (2019): Cloning and expression of α-amylase in E. coli: genesis of a superior biocatalyst for substrate-specific MFC, International journal of green energy (Taylor & Francis), 16/4, 309-316.

16.  Khamrai, Moumita; Banerjee, Sovan Lal; Paul, Saikat; Samanta, Sarthik; Kundu, Patit Paban (2019): Curcumin entrapped gelatin/ionically modified bacterial cellulose based self-healable hydrogel film: An eco-friendly sustainable synthesis method of wound healing patch, International Journal of Biological Macromolecules,(Elsevier Sc, UK, IF 3.9), 122, 940-953. https://doi.org/10.1016/j.ijbiomac.2018.10.196.

Year 2018 (Nine Publication)

17.   Papiya, Farhan; Pattanayak, Prasanta; Kumar, Piyush; Kumar, Vikash and Kundu, P. P. (2018): Development of highly efficient bimetallic nanocomposite cathode catalyst, composed of Ni:Co supported sulfonated polyaniline for application in microbial fuel cells, Electrochimica Acta (Elsevier Sc, UK, IF 5.1), 282, 931-945. https://doi.org/10.1016/j.electacta.2018.07.024

18.   Khamrai, Moumita; Banerjee, Sovan Lal; Kundu, Patit Paban (2018): sustainable production method of mycelium biomass using an isolated fungal strain Phanerochaete chrysosporium (accession no: KY593186): Its exploitation in wound healing patch formation, Biocatalysis and Agricultural Biotechnology (Elesevier Sc), 16, 548-557.

19.  Singh, Amandeep; Kumari, Kamlesh; Kundu, Patit Paban (2018) : Microbial, Physicochemical, and Sensory Analyses-Based Shelf Life Appraisal of White Fresh Cheese Packaged into PET Waste-Based Active Packaging Film, Journal of Packaging Technology and Research (springer, USA), 2/ 2, 125–147. DOI :10.1007/s41783-018-0034-5; JPAC-D-17-00019.4

20.  Bhattacharyya, Aditi; Nasim, Farhat; Mishra, Roshnara; Bharti, Ram P.; Kundu, P. P. (2018): Polyurethane- incorporated Chitosan/alginate core-shell nano-particles for controlled oral insulin delivery, Journal of Applied Polymer Science (Wiley & Sons, USA; IF 1.9), 135/26, 46365-46380.

21.   Bhowmick, Arundhati; Pramanik, Nilkamal; Mitra, Tapas; Gnanamani, Arumugam; Das, Manas; Kundu, Patit Paban (2018): Organically modified clay supported chitosan/hydroxyapatite-zinc oxide nanocomposites with enhanced mechanical and biological properties for the application in bone tissue engineering, International Journal of Biological Macromolecules (Elsevier Sc, UK, I.F. 3.9), 106, 11-19.

doi: 10.1016/j.ijbiomac.2017.07.168.

22.  Mukhopadhyay, Piyasi; Maity, Subhajit; Mondal, Sudipta; Chkarborty, Abhay Sankar; Prajapati, A. K.; Kundu, P. P.(2018): Preparation, characterization and in vivo evaluation of pH sensitive, safe quercetin-succinylated chitosan-alginate core-shell-corona nanoparticle for diabetes treatment, Carbohydrate Polymers (Elsevier Science, Impact Factor 5.2), 182, 42-51.

23.  Mukherjee, S.; Roy Choudhury, U.; Kundu, P. P. (2017): Bio-degradation of polyethylene via complete solubilisation by the action of Pseudomonas fluorescens, bio-surfactant produced by Bacillus licheniformis and anionic surfactant, Journal of Chemical Technology and Biotechnology (Wiley & Sons, IF-3.1), 93, 1300–1311, https://doi.org/10.1002/jctb.5489.

 

24.  Pattanayak, P.; Pramanik, N.; Kumar, P. and  Kundu, P. P. (2017): Fabrication of cost-effective non-noble metal supported on conducting polymer composite such as copper/polypyrrole-graphite oxide (Cu2O/PPy-GO) as an anode catalyst for methanol oxidation in DMFC, International Journal of Hydrogen Energy, (Elsevier Sc, I.F. 4.2), Volume 43, Issue 25, 11505-11519. https://doi.org/10.1016/j.ijhydene.2017.04.300.

  1. Bhowmick, Arundhati; Weatherman, D.; Kundu, P. P. ; Sykes, A. G. (2016): Polypyrrole‐Coated Magnetite Fe3O4 Nanoparticles Containing an Anthraquinone Crown Ether Macrocycle Used for the Extraction of Cu (II) Ion from Water, Advances in Polymer Technology (Wiley & Sons, I.F. 1.1), 37/1, 235–239. DOI: 10.1002/adv.21661.

 

Year 2017 (Twelve Publications)

                           

26.   Dutta, K.; Rana, D.;  Han, H. S.; Kundu, P. P. (2017): Unitized Regenerative Fuel Cells: A Review on Developed Catalyst Systems and Bipolar Plates, Fuel Cells (Wiley &Sons, IF 2.1), 17/6, 736–751.

27.    Papiya, Farhan; Nandy, Arpita; Mondal, Sudipta and Kundu, P. P. (2017) :Co/Al2O3-rGO nanocomposite as cathode electrocatalyst for superior oxygen reduction in microbial fuel cell applications: The effect of nanocomposite composition, Electrochimica Acta (Elsevier Sc, UK, IF 5.1), 254, 1-13.

28.   Bhowmick, Arundhati; Pramanik, Nilkamal; Mitra, Tapas; Gnanamani, Arumugam; Das, Manas; Kundu, Patit Paban (2017): Mechanical and biological investigations of chitosan–polyvinyl alcohol based ZrO2 doped porous hybrid composites for bone tissue engineering applications, New Journal of Chemistry (Royal Chemical Society, UK, I. F. 3.22).  41, 7524-7530. 

  1. Khamrai, Moumita; Banerjee, Sovan Lal; Kundu, Patit P.  (2017): Modified bacterial cellulose based self-healable polyeloctrolyte film for wound dressing application, Carbohydrate Polymers (Elsevier Science, Impact Factor 5.2). 174, 580-590. doi: 10.1016/j.carbpol.2017.06.094. 
  2. Bhattacharyya, Aditi; Mukherjee, Debarati; Mishra, Roshnara;  Kundu, P. P. (2017): Preparation of polyurethane –alginate/chitosan core shell nanoparticles for the purpose of oral insulin delivery, European Polymer Journal (Elsevier Science, Impact Factor 3.2).  92, 294-313.
  3. Maitrya, S.; Mukhopadhyay, P.; Kundu, P. P. and Chakraborti, A. S. (2017), Alginate coated chitosan core-shell nanoparticles for efficient oral delivery 2 of naringenin in diabetic animals - an in vitro and in vivo approach, Carbohydrate Polymers (Elsevier Science, Impact Factor 5.2). 170, 124-132. doi: 10.1016/j.carbpol.2017.04.066.
  4. Kumar, V.; Rudra, R.; Nandy, A.; Hait, S.and Kundu, P. P. (2017): Analysis of partially sulfonated low density polyethylene (LDPE) membranes as separators in microbial fuel cells, RSC Advances  (Royal Chemical Society, UK, I. F. 3.2), 7, 21890–21900.
  5. Mukherjee,S.; Roy Choudhury, U.; Kundu, P. P. (2017): Anionic surfactant induced oxidation of low density polyethylene followed by its microbial bio-degradation, International Bio deterioration and Biodegradation Journal (Elsevier Sc, I.F. 3.6),  117, 255-268.
  6. Bhowmick, Arundhati; Pramanik, Nilkamal; Jana, Piyali; Mitra, Tapas; Gnanamani, Arumugam; Das, Manas; Kundu, Patit Paban (2017): Development of bonelike zirconium oxide nanoceramic modified chitosan based porous nanocomposites for biomedical application, International Journal of Biological Macromolecules (Elsevier Sc, UK, I.F. 3.9), 95, 348-356,   http://dx.doi.org/10.1016/j.ijbiomac.2016.11.052.
  7. Bhowmick, Arundhati; Pramanick, Nilkamal; Mitra, Tapas; Banerjee, Soval Lal; Gnanamani, Arumugam; Das, Manas and Kundu, Patit Paban (2017): Fabrication of porous magnetic nanocomposites for bone tissue engineering, New Journal of Chemistry (Royal Chemical Society, UK, I. F. 3.22), 41 (1), 190-197.
  8. Rudra, R.;  Kumar, V.;  Pramanik, N.;  Kundu, P. P. (2017):  Graphite oxide incorporated crosslinked polyvinyl alcohol and sulfonated styrene nanocomposite membrane as separating barrier in single chambered microbial fuel cell, Journal of Power Sources (Elsevier Sc., UK; IF-6.2), 341, 285-293.
  9. Singh, Amandeep; Kumari, Kamlesh; Kundu, Patit Paban (2017): Extrusion and Evaluation of Chitosan assisted AgNPs immobilized film derived from waste Polyethylene terephthalate for food packaging applications, Journal of Packaging Technology and Research (springer, USA), 1, 165–180 https://doi.org/10.1007/s41783-017-0017-y.

 

Year 2016 (Twenty two Publications)

 

  1. Dutta, Kingshuk; Das, Suparna; Kundu, Patit P. (2016): Polyaniline nanowhiskers induced low methanol permeability and high membrane selectivity in partially sulfonated PVdF-co-HFP membranes, RSC Advances  (Royal Chemical Society, UK, I. F. 3.2), 2016, 6, 107960.
  2. Pramanik, Nilkamal; Dutta, Kingshuk; Basu, Ranjan; Kundu, Patit P. (2016): Aromatic π-Conjugated Curcumin on Surface Modified Polyaniline/Polyhydroxyalkanoates based 3D Porous Scaffold for Tissue Engineering Application, ACS Biomaterials Science & Engineering (American Chemical Society, USA; I. F. 3.2), 2(12), 2365-2377.
  3. Banerjee, Sovan Lal; Khamrai, Moumita; Kundu, P. P.; Singha Nikhil K; (2016) Synthesis of a self-healable and pH responsive hydrogel based on an ionic polymer/clay nanocomposite, RSC Advances  (Royal Chemical Society, UK, I. F. 3.2), 6 (85), 81654-81665.
  4. Mukhopadhyay, Piyasi; Maity, Subhajit; Chakraborty, Sandipan; Rudra, Ruchira; Ghodadara, Hiral; Solanki, Manisha; Chkarborty, Abhay Sankar; Prajapati, A. K.; Kundu,P. P.(2016): Oral delivery of quercetin to diabetic animals using novel pH responsive carboxypropionylated chitosan/alginate microparticles, RSC Advances   (Royal Chemical Society, UK, I. F. 3.2), 6 (77), 73210-73221.
  5. Jana, Piyali; Sarkar, Kishor; Mitra, Tapas; Chatterjee, Abhishek; Gnanamani, A; Chakraborty, Gopal;  Kundu, P. P. (2016): Preparation of guar gum scaffold film grafted with ethylenediamine and fish scale collagen, cross-linked with ceftazidime for wound healing application, Carbohydrate Polymers (Elsevier Science, Impact Factor 5.2), 153, 573-581.
  6. Bhowmick, Arundhati; Jana, Piyali; Pramanick, Nilkamal; Mitra, Tapas; Banerjee, Soval Lal; Gnanamani, Arumugam; Das, Manas and Kundu, Patit Paban (2016):Multifunctional zirconium oxide doped chitosan based hybrid nanocomposites as bone tissue engineering materials, Carbohydrate Polymers (Elsevier Science, Impact Factor 5.2), 151, 879–888.
  7. Kumar, Vikash; Kumar, Piyus; Nandy, Arpita; Kundu, Patit Paban (2016): A Nanocomposite membrane composed of nano-alumina within sulfonated PVDF-co-HFP/Nafion blend as separating barrier in a single chambered microbial fuel cell,  RSC Advances   (Royal Chemical Society, UK, I. F. 3.2), 6 (28), 23571-23580.
  8. Kumar, Vikash; Kumar, Piyus; Nandy, Arpita; Kundu, Patit Paban (2016): Analysis of polybenzimidazole and polyvinylpyrrolidone blend membranes as separating barrier in single chambered microbial fuel cells, Biochemical Engineering Journal (Elsevier Sc, UK, I. F. 2.1),  111, 34-42.  
  9. Kumar, Vikash; Mandal, Sudipta; Nandy, Arpita; Kundu, Patit Paban (2016): Fabrication of laminated and coated Nafion 117 membranes for reduced mass transfer in microbial fuel cells, RSC Advances   (Royal Chemical Society, UK, I. F. 3.2), 6 (26), 21526-21534.
  10. Nandy, Arpita; Kumar, Vikash; Kundu, Patit Paban (2016): Effect of electric impulse for improved energy generation in mediatorless dual chamber microbial fuel cell through electroevolution of Escherichia coli, Biosensor and bioelectronics (Elsevier Sc, UK; I.F. 8.2), 79, 796-801. DOI: 10.1016/j.bios.2016.01.023.
  11. Bhattacharyya, Aditi; Mukhopadhyay, Piyasi; Pramanik Nilkamal;  Kundu, Patit P. (2016) : Effect of Polyethylene Glycol on Bis(2-hydroxyethyl) terephthalate-Based Polyurethane/Alginate pH-Sensitive Blend for Oral Protein Delivery, Advances in Polymer Technology (Wiley & Sons, I.F. 1.1), 35(1). DOI: 10.1002/adv.21525
  12. Dutta, Kingshuk; Das, Suparna; Kundu, Patit Paban (2016): Effect of the presence of partially sulfonated polyaniline on the proton and methanol transport behavior of partially sulfonated PVdF membrane, Polymer Journal (Nature Group, UK; I.F. 1.7), 48, 301-309. doi:10.1038/pj.2015.106.
  13. Banerjee, S.L.; Khamrai, M.; Sarkar, K.; Singha, N. K.;  Kundu, P. P. (2016): modified chitosan encapsulated core-shell Ag Nps for superior antimicrobial and anticancer activity, International Journal of Biological Macromolecules (Elsevier, Impact Factor 3.9), 85, 157-167. doi:10.1016/j.ijbiomac.2015.12.068.
  14. Mukherjee, S.; Choudhury, U R; Kundu, P. P. (2016): Bio-degradation of Polyethylene Waste By Simultaneous Use of Two Bacteria: Bacillus licheniformis for production of Bio-surfactant and Lysinibacillus fusiformis for Bio-degradation. RSC Advances (Royal Chemical Society, UK, I. F. 3.2), 6 (4), 2982-2992. DOI: 10.1039/C5RA25128A.
  15. Dutta, Kingshuk; Das, Suparna; Kundu, Patit Paban (2016):  Highly methanol resistant and selective ternary blend membrane composed of sulfonated PVdF-co-HFP, sulfonated polyaniline and nafion, Journal of Applied Polymer Science (John Wiley and Sons, Impact Factor – 1.9), 133 (15), 43294.
  16. Bhowmick, Arundhati; Mitra, Tapas; Gnanamani, Arumugam; Das, Manas and Kundu, Patit Paban (2016): Development of biomimetic nanocomposites as bone extracellular matrix for human osteoblastic cells, Carbohydrate Polymers (Elsevier Science, Impact Factor 5.2). 141, 82-91. doi:10.1016/j.carbpol.2015.12.074.
  17. Jana, Piyali; Sarkar, Kishor; Mitra, Tapas; Chatterjee, Abhishek; Gnanamani, A; Chakraborty, Gopal;  Kundu, P. P. (2016): Synthesis of a carboxy methylated guar gum grafted polyethyleneimine copolymer as an efficient gene delivery vehicle, RSC Advances (Royal Chemical Society, UK, I. F. 3.2), 6 (17), 13730-13741.
  18. Das, Rakesh;  Banerjee, Sovan Lal; Kumar, Rajesh;  Kundu, P. P. Development of sustainable elastomeric engineering bio-nanocomposites from vegetable oil with improved mechanical stability and shape memory properties, Journal of Industrial and Engineering Chemistry (Elsevier Sc, UK; I.F. 4.9). 35, 388-399.
  19. Das, Rakesh;  Banerjee, Sovan Lal; Kumar, Rajesh;  Kundu, P. P. (2016): Fabrication and characterization of in situ graphene oxide reinforced high-performance shape memory polymeric nanocomposites from vegetable oil, RSC Advances (Royal Chemical Society, UK, I. F. 3.2), 6 (33), 27648-27658.
  20. Bhattarchaya, Aditi; Mukherjee, Debarati; Misra, Rosonara; Kundu, Patit Paban (2016): Development of pH sensitive polyurethane–alginate nanoparticles for safe and efficient oral insulin delivery in animal models, RSC Advances (Royal Chemical Society, UK, I. F. 3.2),  6 (48), 41835-41846.
  21. Pramanik, N.; Dey, J.; Basu, R. K.; Rath, T.; Kundu, P. P. (2016): Fabrication of magnetite nanoparticle doped reduced graphene oxide grafted polyhydroxyalkanoate nanocomposites for tissue engineering application, RSC Advances (Royal Chemical Society, UK, I. F. 3.2),  6 (52), 46116-46133.
  22.  Das, S.; Datta, K.; Kundu, P. P. (2016): Sulfonated polypyrrole matrix induced enhanced efficiency of Ni nanocatalyst for application as an anode material for DMFCs, Materials Chemistry and Physics (Elsevier Sc, UK, I.F. 2.2), 176, 143-151.

 

 

Year 2015 (Twenty Eight Publications)

 

 

  1. Mukherjee, S.; Choudhury, U R; Kundu, P. P. (2015): Biotic oxidation of polyethylene by using bio-surfactant produced by B.licheniformis: A novel technique, RSC Advances (Royal Chemical Society, UK, I. F. 3.2), 5 (92), 75089-75097.
  2. Bhowmick, Arundhati; Pramanik, Nilkamal;  Jana Manna, Piyali; Mitra, Tapas; Selvaraj, Thirupathi Kumara Raja; Gnanamani, Arumugam; Das, Manas and Kundu, Patit Paban (2015): Development of porous and antimicrobial CTS-PEG-HAP-ZnO nano-composites for bone tissue engineering, RSC Advances (Royal Chemical Society, UK, I. F. 3.2), 5 (120), 99385-99393.
  3.  Rudra, Ruchira;    Kumar,Vikash and   Kundu, Patit Paban (2015):Acid catalysed cross-linking of poly vinyl alcohol (PVA) by glutaraldehyde: effect of crosslink density on the characteristics of PVA membranes used in single chambered microbial fuel cells,  RSC Advances (Royal Chemical Society, UK, I. F. 3.2), 5 (101), 83436-83447.
  4. Mukhopadhyay, Piyasi;  Kundu, Patit Paban (2015): Chitosan-graft-PAMAM / alginate core-shell nanoparticles: A safe and promising oral insulin carrier in Animal Model, RSC Advances (Royal Chemical Society, UK, I. F. 3.2), 5 (114), 93995-94007.
  5. Das, Suparna; Kundu, Patit P. (2015): Pt-Ru/Al2O3-C Nanocomposites as Direct Methanol Fuel Cell Catalysts for electrooxidation of methanol in acidic medium, RSC Advances (Royal Chemical Society, UK, I. F. 3.2), 5 (113), 93539-93546; DOI:10.1039/c5ra1460 3h.
  6.  Mitra, Tapas;   JanaManna, Piyali;     Selvaraj, Thirupathi Kumara Raja;   Gnanamani, Arumugam  and    Kundu, Patit Paban (2015): Curcumin loaded nanographene oxide reinforced fish scale collagen - A 3D scaffold biomaterial for wound healing application,  RSC Advances (Royal Chemical Society, UK, I. F. 3.2), 5 (119), 98653-98665. DOI: 10.1039/C5RA15726A
  7. Pramanik, Nilkamal; Mitra Tapas; Khamrai, Moumita; Bhattacharyya, Aditi; Mukhopadhyay, Piyasi; Gnanamani, A.; Basu, Ranjan Kumar; Kundu, Patit Paban (2015): Characterization and evaluation of curcumin loaded guar gum-polyhydroxyalkanoates blend film for wound healing application, RSC Advances (Royal Chemical Society, UK, I. F. 3.2), 5/78, 63489-63501.
  8. Kumar, Piyush; Singh, A.D; Kumar, Vikash; Kundu, Patit Paban (2015): Incorporation of nano-Al2O3 within the blend of sulfonated-PVdF-co-HFP and Nafion for high temperature application in DMFC, RSC Advances (Royal Chemical Society, UK, I. F. 3.2), 5/78, 63465-63472.
  9. Kumar, Piyush; Kundu, Patit Paban (2015): Formation of semi-IPN membrane composed of crosslinked SPS-[PVdF-co-HFP/Nafion] for application in DMFC: A fine tuning between crosslinker and initiator, Materials Chemistry and Physics (Elsevier Sc, UK; I.F. 2.2), 164, 188-197.
  10. Sarkar, Kishor; Banerjee, Sovan Lal; Kundu, Patit Paban;  Madras, Giridhar; Chatterjee, Kaushik (2015): Biofunctionalized surface-modified silver nanoparticles for gene delivery. Journal of Materials Chemistry-B (Royal Chemical Society publications, UK; I.F. 4.7), 3/26, 5266-5276.

 DOI: 10.1039/C5TB00614G.

  1. Kumar, Piyush; Kundu, Patit Paban (2015): Coating and lamination of Nafion117 with partially sulfonated PVdF for low methanol crossover in DMFC applications, Electrochimica Acta (Elsevier Science, I.F. 5.1), 173, 124-130.

DOI information: 10.1016/j.electacta.2015.05.044.

  1. Nandy, Arpita; Kumar, Vikash; Khamrai, Moumita; Kundu, Patit Paban (2015): MFC with vermicompost soil: power generation with additional importance of waste management, RSC Advances (Royal Chemical Society, UK, I. F. 3.2), 5 (39), 30758-30767.
  2. Rath, Tanmoy; Kundu, Patit Paban (2015): Reduced graphene oxide paper based nanocomposite materials for flexible supercapacitors, RSC Advances (Royal Chemical Society, UK, I. F. 3.2),  5 (34), 26666-26674.
  3. Kumar, Vikash; Kumar, Piyush; Nandy, Arpita; Kundu, P. P. (2015): Crosslinked inter penetrating network of sulfonated styrene and sulfonated PVdF-co-HFP as electrolytic membrane in a single chamber microbial fuel cell, RSC Advances (Royal Chemical Society, UK, I. F. 3.2), 5 (39), 30758-30767.
  4. Bhowmick, A; Saha, A;  Pramanik, N; Banerjee, S.; Das, M.; Kundu, P. P.. (2015): Novel magnetic antimicrobial nanocomposites for bone tissue engineering applications, RSC Advances (Royal Chemical Society, UK, I. F. 3.2), 5 (32), 25437-25445.
  5. Das, Suparna; Dutta, Kingshuk; Kundu, Patit Paban (2015): Nickel nanocatalysts supported on sulfonated polyaniline: potential toward methanol oxidation and as anode materials for DMFCs, J. Mater. Chem. A (Royal Chemical Society, UK, I.F 9.3), 3 (21), 11349-11357; DOI: 10.1039/C5TA01837D.
  6. Jana Manna, Piyali; Mitra, Tapas; Pramanik, Nilkamal; Kavitha, V; Gnanamani, A; Kundu, P. P. (2015): Potential use of curcumin loaded carboxymethylated guar gum grafted gelatin film for biomedical applications, International journal of biological macromolecules ( Elsevier Sc. I. F. 3.9), 75, 437-446.
  7. Kumar, Piyush; Kundu, Patit Paban (2015): A study on the heat behavior of PEM, prepared by incorporation of crosslinked sulfonated polystyrene in the blend of PVdF-co-HFP/Nafion, for its high temperature application in DMFC, Materials Today Communications, Elsevier Science, Volume 2, March 2015, Pages e1–e8.
  8. Mukhopadhyay, Piyasi; Bhattacharya, Sourav; Nandy, Arpita; Bhattacharya, Aditi; Mishra, Roshnara and Kundu, P. P.  (2015): Assessment if in-vivo chronic toxicity of chitosan and its derivatives used as oral insulin carrier, Toxicology Research (Royal Chemical Society, UK, Impact factor 3.9), 4, 281-290; DOI: 10.1039/C4TX00102H.
  9. Dutta, Kingshuk; Das, Suparna, Rana, Dipak; Kundu, Patit Paban (2015): Enhancements of catalyst distribution and functioning upon utilization of conducting polymers as supporting matrices in DMFCs: A review, Polymer Reviews, Taylor and Francis (I.F. 6.2), 55/1, 1-56 DOI: 10.1080/15583724.2014.958771.
  10. Dutta, Kingshuk; Das, Suparna; Kundu, Patit Paban: Synthesis, preparation and performance of blends and composites of π-conjugated polymers and their copolymers in DMFCs, Polymer Reviews, Taylor and Francis (I.F. 6.2), 55 (4), 630-677; DOI: 10.1080/15583724.2015.1028631.
  11. Das, Suparna; Dutta, Kingshuk; Kundu, Patit Paban (2015): Progress in Developments of Inorganic Nanocatalysts for Application in Direct Methanol Fuel Cells. Critical Reviews in Solid State and Materials Science, Taylor and Francis (I.F. 6.5), Issue 5, Volume 40, Page 316-357.
  12. Nandy, Arpita; Kumar, Vikash; Mondal, Sudipta; Dutta, Kingshuk; Salah, Maryam; Kundu, Patit Paban (2015): Performance Evaluation of Microbial Fuel Cells: Effect of Varying Electrode Configuration and Presence of a Membrane Electrode Assembly, New Biotechnology, Elsevier Publications (Impact Factor 3.7) Volume 32, Issue 2, Pages 272–281.
  13. Mukhopadhyay, Piyasi; Chakraborty, Souma; Bhattacharya, Sourav; Mishra, Roshnara and Kundu, P. P.  (2015): Smart, pH sensitive core shell nanoparticles for oral insulin delivery: In vitro and in vivo studies in diabetic animal model, International Journal of Biological Macromolecules (Elsevier, Impact Factor 3.9), Volume 72, Pages 640–648.
  14. Pramanik, Nilkamal; Kundu P. P. (2015): Spectroscopic Analysis and Catalytic Applications of Biopolymer Capped Silver Nanoparticle - An Effective Antimicrobial Agent,  Journal of Applied Polymer Science, I. F-1.9 (John Wiley and Sons), 132, 41495-41498.
  15. Kumar, Vikash; Nandy, Arpita; Salahuddin, M.; Kundu, P. P. (2015): Performance Assessment of Partially Sulphonated PVDF-co-HFP as Polymeric Electrolyte Membrane in Single Chambered Microbial Fuel Cell, Applied Energy, Elsevier Publications (Impact Factor 7.9), Volume 137, Pages 310–321.
  16. Dutta, Kingshuk; Das, Suparna; Kundu, Patit Paban (2015): Partially sulfonated polyaniline induced high ion-exchange capacity and selectivity of Nafion membrane for application in direct methanol fuel cells. Journal of Membrane Science (Elesevier Science, I.F. 6.6), Volume 473, Pages 94–101.
  17. Mandal, Sudipta; Soam Shweta,; Kundu, Patit Paban (2015): Reduction of methanol crossover and improved electrical efficiency in Direct Methanol Fuel Cell by the formation of a thin layer on Nafion 117 membrane: Effect of dip-coating of a blend of Sulphonated PVdF-co-HFP and PBI, Journal of Membrane Sci., Elsevier Publications (Impact Factor 6.6), Volume 474, Pages 140–147.

 

 

 

Year 2014 (Twenty one Publications)

 

  1. Das, Rakesh; Kumar, Rajesh; Kundu, P. P. (2014): Engineered elastomeric bio-nano composites from linseed oil/organoclay tailored for vibration damping. RSC Advances (Royal Chemical Society, UK, Impact factor 3.2), 4 (103), 59265 – 59274.
  2. Mukhopadhyay, Piyasi; Sarkar, Kiishor; Bhattacharya, Sourav; Mishra, Roshnara and Kundu, P. P. (2014) : Efficient oral insulin delivery by dendronized chitosan: In Vitro and In Vivo studies, RSC Advances (Royal Chemical Society, UK, Impact factor 3.2), 4, 43890-43902.
  3. Bhtattacharya, Sourav; Chakraborty, Mousumi; Mukhopadhyaya, Piyasi; Kundu, P. P.; Mishra, Roshnara (2014): Viper and Cobra venom neutralization by alginate coated multicomponent polyvalent antivenom administered by the oral route, PLOS Neglected Tropical Diseases (Impact Factor 4.4), 8(8): e3039. doi:10.1371/journal.pntd.0003039.
  4. Mitra, Pritha; Sarkar, Kishor; Kundu, Patit Paban (2014): Carboxymethyl chitosan modified montmorillonite for efficient removal of cationic dye from waste water. Defence Science Journal, 64, 198-208.
  5. Dutta, Kingshuk; Das, Suparna; Kundu, Patit Paban (2014): Low methanol permeable and highly selective membranes composed of pure and/or partially sulfonated PVdF-co-HFP and polyaniline. Journal of Membrane Science (Elsevier Science, I.F. 6.6), 113, 169-177, DOI information: 10.1016/j.memsci.2014.05.049.
  6. Mukhopadhyay, Piyasi; Sarkar, Kishor; Bhattacharya, Sourav; Bhattacharyya, Adidti; Mishra, Roshnara and Kundu, P. P. (2014): pH- sensitive N-Succinyl Chitosan grafted Polyacryloamide Hydrogel for Oral Insulin Delivery, Carbohydrate Polymers (Elsevier Science, Impact Factor 5.2), 112, pp. 627-637
    DOI information: 10.1016/j.carbpol.2014.06.045.
  7. Das, Rakesh; Pramanik, Nilkamal Kundu, P. P. (2014): Spectroscopic Characterization and Microbial Degradation of Engineering Bioelastomers from Linseed Oil, Journal of Polymer Engineering (I.F. 0.5), doi:10.1515/polyeng-2013-0277.
  8. Pramanik, Nilkamal; Das, Rakesh; Rath, Tanmoy; Kundu P. P. (2014) : Microbial Degradation of Linseed Oil based Elastomer and subsequent Accumulation of Poly(hydroxyl butyrate-co-hydroxy valerate), J. of Applied Biochemistry and Biotechnology (Springer Publications (I.F. 1.7), Volume 174, Issue 4, pp 1613-1630, DOI: 10.1007/s12010-014-1061-5.
  9. Dutta, Kingshuk; Das, Suparna; Kundu, Patit Paban (2014): Epoxidized Esters of Palm Kernel Oil as an Effective Plasticizer for Polyvinyl Chloride: A Study of Mechanical Properties and Effect of Processing Conditions
    International Polymer Processing, International Polymer Processing, Hanser Publishers (Impact Factor 0.5), XXIV/4, 495-506.
  10. Das, Rakesh; Kumar, Rajesh; Kundu, P. P. (2014): Damping Evaluation of Linseed Oil- Based Engineering Elastomers by Vibration Response Method, ISRN Polymer Science, V-2014, Article ID 840397 (Hindwai Publishers).
  11. Kumar, Piyush; Dutta, Kingshuk; Das, Suparna; Kundu, Patit Paban: Membrane prepared by incorporation of crosslinked sulfonated polystyrene in the blend of PVdF-co-HFP/Nafion: A preliminary evaluation for application in DMFC, Applied Energy, Elsevier Publications (Impact Factor 7.9), 2014; 123:66-74.
  12. Pramanik, Nilkamal; Mukherjee, Khusi; Nandy, Arpita; Kukherjee, Shritama; Kundu, Patit Paban: Comparative analysis of different properties of polyhydroxyalkanoates isolated from two different bacterial strains: Alkaliphilus oremlandii OhILAs and recombinant Escherichia coli XL1B., Journal of Applied Polymer Science, (John Wiley and Sons, I. F-1.9), 131, 41080-41084, doi: 10.1002/app.41080.
  13. Dutta, Kingshuk; Das, Suparna; Kumar, Piyus; Kundu, Patit Paban: A Review on Aromatic Conducting Polymers-Based Catalyst Supporting Matrices for Application in Microbial Fuel Cells, Polymer Reviews, Taylor and Francis (I.F. 6.2), 2014; 54:1-35.
  14. Dutta, Kingshuk; Kumar, Piyus; Das, Suparna; Kundu, Patit Paban (2014): Utilization of Conducting Polymers in Fabricating Polymer Electrolyte Membranes for Application in Direct Methanol Fuel Cells, Polymer Reviews,  (Taylor and Francis, I.F. 6.2), 901/2014; 54:1-32.
  15. Dutta, Kingshuk; Das, Suparna; Kumar, Piyus; Kundu, Patit Paban:Polymer electrolyte membrane with high selectivity ratio for direct methanol fuel cells: A preliminary study based on blends of partially sulfonated polymers polyaniline and PVdF-co-HFP, Applied Energy, Elsevier Publications (Impact Factor 7.9), 2014; 118:183-191.
  16. Arundhati Bhowmick, Tarulata Mahata, Ratnesh Kumar, Patit Paban Kundu and Manas Das, Multicomponent Fabrication of Bone-like Composite Materials Using Chitosan/PMMA-co-PHEMA/Nano-Hydroxyapatite, Advances in Polymer Technology (Wiley Blackley), (Impact Factor 1.1), DOI: 10.1002/adv.21391; 33, 21391.
  17. Kumar, Piyush; Das, Suparna; Dutta, Kingshuk; Kundu, Patit Paban (2014): An overview of unsolved deficiencies of direct methanol fuel cell technology: factors and parameters affecting its widespread use. International Journal of Energy Research (Wiley Blackley), (Impact Factor 2.4), 38/11, 1367-1390, DOI: 10.1002/er.3163.
  18. Das, Suparna; Dutta, Kingshuk; Kumar, Piyus; Kundu, Patit Paban (2014): Partial sulfonation of PVdF-co-HFP: A preliminary study and characterization for application in direct methanol fuel cell. Applied Energy, Elsevier Publications (Impact Factor 7.9), 113, 169-177.
  19. Mukherjee, S.; Kundu, P. P.: Alakaline Fungal Degradation of Oxidized Polyethylene in Black Liquor: Studies on the effect of Lignin Peroxidase and Manganese Peroxidase, Journal of Applied Polymer Science ISSN: 1097-4628 (John Wiley, USA). (Impact Factor: 1.9), 131, 40738-40742.
  20. Bahttacharyya, Aditi; Mukhopadhyay, Piyasi; Kundu, P. P. (2014): Synthesis of a Novel pH –sesitive Polyurethane-Alginate Blend with Polyethylene Terephthatlate waste for Oral Delivery of Protein, Journal of Applied Polymer Science ISSN: 1097-4628 (John Wiley, USA). (Impact Factor: 1.9), 131, 40650-40655.
  21. Kumar, Piyush; Dutta, Kingshuk, Kundu, Patit Paban (2014): Enhanced performance of direct methanol fuel cells: a study on the combined effect of various supporting electrolytes, flow channel designs and operating temperatures. International Journal of Energy Research (Wiley Blackley), (Impact Factor 3.0), 2014; 38: 41–50.

 

Year 2013 (Sixteen Publications)

  1. Dutta, Kingshuk; Kundu, Patit Paban (2013): Effects of various factors on the interfacial mass transfer phenomenon and dispersion of polyaniline in an aqueous/organic bi-/tri-phasic system. Colloids and Surfaces A: Physicochemical and Engineering Aspects (Impact Factor 2.8), Elsevier Publications, 2013; 436:830-838.
  2. Nandy, Arpita; Kumar, Vikash; Kundu, Patit P. (2013): Utilization of proteinaceous materials for power generation in a mediatorless Microbial Fuel Cell by a new electrogenic bacteria Lysinibacillus sphaericus VA5. Enzyme and Microbial Technology (Impact Factor 2.9), Elsevier Publications, vol. 53 issue 5 October 10, 2013. p. 339-344.
  3.  Dutta, Kingshuk; Kundu, Patit Paban (2013): Interaction between oxidized polyaniline and oppositely charged amphiphilic assemblies in an aqueous/organic biphasic system, Journal of Colloid and Interface Science (Elsevier Sc). (Impact Factor 5.1), 06/2013; 407:516-523
  4. Singh, RP; Kundu, P.P. (2013): DSC and Micro Structural Studies of Methylcellulose Gels in N, N Dimethylformamide, J. of Polymer Research (Springer), (I. P. Factor 1.9), August 2013, 20:226.
  5. Das, Rakesh; Kumar, Rajesh; Kundu, P. P. (2013): Vibration Damping Characterization of Linseed oil based Elastomers for its Effectiveness to Attenuate Structural Vibration. Journal of Applied Polymer Science (Impact Factor – 1.9), 130: 3611–3623. doi: 10.1002/app.39607.

  114.Sarkar, Kishor; Kundu, P. P.: PAMAM Conjugated Chitosan through naphthalimide moiety for enhanced gene transfection efficiency. Carbohydrate Polymers. (I. F. – 5.2), 98 (2013), pp. 495-504.

115.  Sarkar, Kishor; Chatterjee, Abhisek; Chakraborti, Gopal; Kundu, P. P.: Blood Compatible N-maloyl chitosan-graft-PAMAM copolymer for enhanced gene transfection. Carbohydrate Polymers. (I. F. 5.2), 98 (2013), pp. 596-606.  

  1. Dutta, Kingshuk; Kundu, Patit Paban: Reversible Assembly and Disassembly of Amphiphilic Assemblies by Electropolymerized Polyaniline Films: Effects Rendered by Varying the Electropolymerization Potential. The Journal of Physical Chemistry B (American Chemical Society) (Impact Factor 3.2), 117 (2013), 7797-7805.

 

  1. Dutta, Kingshuk; Kundu, Patit Paban: Amphiphiles as hydrophobicity regulator: fine tuning the surface hydrophobicity of an electropolymerized film. Journal of Colloid and Interface Science (Elsevier Sc). (Impact Factor 5.1), 397 (2013), pp. 192-198. DOI 10.1016/j.jcis.2013.01.045.

 

  1. Katoch, Sunain, Sharma, Vinay and Kundu, P. P., Synthesis and Characterization of Saturated Polyester and nanocomposites derived from Glycolyzed PET waste with varied compositions for food packaging applications. Bulletin of Materials Science (Springer and Indian Academy, Bangalore). (Impact Factor:1.0). Vol. 36, No. 2, April 2013, pp. 277–286.

 

  1. Kundu, Patit P., Jindal, Santosh, Goswami, Manish: Characterization and in vitro and in vivo evaluation of cross-linked chitosan films as implant for controlled release of citalopram. Bulletin of Material Science (Springer and Indian Academy, Bangalore). (Impact Factor: 1.0), Vol. 36, No. 1, February 2013, pp. 175–182.
  2. Singh, Ratan Pal; Kumari, K.; Kundu, P. P.: Controlled Release of Urea through Mesoporous Methylcellulose films Derived from N, N Dimethyl Formamide, International Journal of Polymeric Materials and Polymeric Biomaterials (I. F of 2013: 2.7). Volume 62, 2013, DOI:10.1080/00914037.2013.769238.
  3. Sarkar, Kishor; Debnath, M.; Kundu, P. P.: Preparation of Low Toxic Fluorescent Chitosan-graft-Polyethyleneimine Copolymer through Naphthalimide Moiety for Improved DNA Complexation. Carbohydrate Polymers. (I. F. 5.2), 2013, 92, 2048-2057.
  1. Mukhopadhyay, P.; Sarkar, Kishor; Chakraborty, M.; Bhattacharya, S.; Mishra, R.; Kundu, P. P.: Oral insulin delivery by Self‐assembled Chitosan Nanoparticles: In vitro and in vivo studies in diabetic animal model. Materials Science & Engineering C (Impact Factor – 5.1), Volume 33, (2013) Pages 376–382.
  2. Mukhopadhyay, P.; Sarkar, Kishor; Soam Shweta; Kundu, P. P*. Formulation of pH-Responsive Carboxymethyl Chitosan and Alginate Beads for the Oral Delivery of Insulin. Journal of Applied Polymer Science (Impact Factor – 1.9), Volume 129, Issue 2, pages 835–845, 15 July 2013.

124. Singh Ratan Pal, Kundu Patit P. Rheological Properties of the Gels of Methylcellulose in N, N Dimethyl Formamide : Validity of Scaling Law, Polymer Science, Series A (Springer, I.F. 0.9), Vol 55, issue 7, July 2013. p. 455 – 462.

 

Year 2012 (Six Publications)

 

125. Kundu, Patit Paban; Bhowmick, Arundhuti; Mahata, Tarulata; Kumar, Ratnesh: Miscibility of the Blends of Chitosan and Polymethymethacrylate-co-polyhydroxyethylmethacrylate Copolymers. Trends in Carbohydrate Research, 2012, 4/4, 2433.

126. Sarkar, K.; Kundu, P. P. Preparation of Low Molecular Weight N-Maleated Chitosan-graft-PAMAM Copolymer for Enhanced DNA Complexation. International Journal of Biological Macromolecules (Elsevier Sc., I. F. 3.9 ), 2012, 51, 859-867.

127. Sarkar, K.; Banerjee, S. L.; Kundu, P. P. Removal of Anionic Dye in Acid Solution by Self Crosslinked Insoluble Dendronized Chitosan. Hydrology Current Research. 2012, 3, 133. (ISSN- 2157-7587 HYCR).

128.  Sarkar, K.; Debnath, M.; Kundu, P. P. Recyclable Crosslinked O-Carboxymethyl Chitosan for Removal of Cationic Dye from Aqueous Solutions. Hydrology Current Research. 2012, 3, 138. (ISSN- 2157-7587 HYCR).

129. Katoch, Sunain, Sharma, Vinay, Bera, M. B. and Kundu, P. P. Optimization of PET glycolysis process by response surface methodological approach -A two component modelling using glycolysis time and temperature. ISRN Polymer Science, Volume 2012, Article ID 630642, 9 pages, doi:10.5402/2012/630642.

130. Mukhopadhyay, P., Mishra, R., Rana, D., Kundu, P.P. Strategies for effective oral insulin delivery with modified chitosan nanoparticles: A review; Progress in Polymer Science (Elsevier Sc, Impact Factor – 26.3), Volume 37, Issue 11, November 2012, Pages 1457-1475.

 

Year 2011 (Four Publications)

131.    Katoch, Sunain and Kundu, P. P., Thermal and Mechanical Behavior of Unsturated Polyester (Derived from PET Waste) and Montmorillonite filled nancomposites synthesized by IN-SITU polymerization. Journal of Applied Polymer Science ISSN: 1097-4628 (John Wiley, USA). (Impact Factor: 1.9), 122/4, 2731-2740.

132.    Sarkar, K, Srivastava, R, Chatterjee, U. C., Kundu, P. P. Evaluation of Chitosan and their self-assembled nanoparticles with pDNA for the application in gene therapy Journal of Applied Polymer Science ISSN: 1097-4628 (John Wiley, USA). (Impact Factor: 1.9), 121, 2239-2249.

133.  Katoch, Sunain, Sharma, Vinay and Kundu, P. P. Swelling kinetics of unsaturated polyester and their montmorillonite filled nanocomposite synthesized from glycolyzed PET, Diffusion Fundamental (Universitat Leipzig, Germany), 15/ 4, 1-28.

 

Year 2010 (Ten Publications)

134.  Jindal, Santosh Kumar, Goswami, Manish and Kundu, P. P. (2010), Erosion-Diffusion Cell: A New Apparatus to Study In-Vitro Drug Release From Erosion-Diffusion Based Formulations, Acta Pharmaceutica Sciencia, 52, 39-44.

135.  Sharma, Vinay, Banait, J. S. and Kundu, P. P. (2010): Morphological  and thermal characterization of linseed oil based polymers from cationic and thermal polymerization, Journal of Polymers and the Environment   (Springer, USA; I. F.:1.7), 18/3, 235-242.

136.  Katoch, Sunain, Sharma, V., Kundu, P. P. Swelling kinetics of unsaturated polyester-layered silicate nanocomposites synthesized from glycolyzed PET with varied composition, Diffusion Fundamentals (Universitat Leipzig, Germany), 12, 1-31.

137.  Katoch, S., Sharma, V., Kundu, P. P.: Water sorption and diffusion through Saturated Polyester and their nanocomposites synthesized from glycolyzed PET with varied composition. Chemical Engineering Science (Elsevier Sc, UK; I.F. 3.3), 65, 4378-4387.

138. Sharma, Vinay and Kundu, P. P. (2010): Biocatalysts in Microbial Fuel  Cells. Enzyme and Microbial Technology (Elsevier Sc, UK; I.F. 2.3), 47 (5)-179-188.

139.  Kundu, M., Mallipragada, S., Larock, R. C and Kundu, P. P.: Rheological Properties of Methylcellulose Aqueous Gels under Dynamic Compression: Frequency Sweep and Validity of Scaling Law, Journal of Applied Polymer Science ISSN: 1097-4628 (John Wiley, USA). (Impact Factor: 1.7). 117/4, 2436-2443.

140.  Sharma, Vinay, Banait, J. S. and Kundu, P. P. (2010): Water Soprtion and Diffusion through Linseed oil based Polymers and Nano-composites. International Journal of Transport Phenomena ISSN: 1540-0069 (Old City Pub., USA), 11, 267-282. (Impact Factor: ).

141.  Kundu, P. P., Larock, R.C. (2010): Montmorillonite Filled Nanocomposites of Tung oil - Styrene - Divinylbenzene Polymers Prepared by Thermal Polymerization. Journal of Applied Polymer Science ISSN: 1097-4628 (John Wiley & Sons, USA).  (Impact Factor: 1.9), 119 (3),1297-1306.

142.  Sharma, Vinay, Banait, J. S., Larock, R. C. and Kundu, P. P. (2010): Synthesis and Characterization of Linseed oil based Nanocomposites. Polymer Composites (Impact Factor: 1.6) ISSN 1548-0569 (John Wiley & Sons, USA), 81, 630-637.

143.  Ghatak, H. R., Kumar, Satish, and Kundu, P. P. (2010): Thermochemical comparison of lignin separated by electrolysis and acid precipitation from soda black liquor of agricultural residues. Thermochimica Acta (Elsevier Sc, I.F. 2.2), 502, 85-89.

 

Year 2009 (Seven Publications)

144.  Kumari K, Kundu, P. P. (2009): Effect of drying processes and curing time of chitosan-lysine semi-IPN beads on chlorpheniramine maleate delivery. J. Microencapsulation (Impact Factor: 1.6). ISSN: 1464-5246 (Taylor & Francis health sciences), 26, 54-62.

145.  Kumari, Kamlesh and Kundu, P. P. (2009) : DSC studies on the Curing Kinetics of Chitosan-alanine using Glutaraldehyde as cross-linker. Journal of Thermal Analysis and Calorimetry (Impact Factor: 2.0) ISSN: 1388-6150 (Springer Sc Publishing, Germany)  98, 469-476.

146.  Sharma, Vinay, Banait, J. S. and Kundu, P. P.: Swelling Kinetics of Linseed Oil Based Nanocomposites. Journal of Applied Polymer Science (Impact Factor : 1.9) ISSN: 1097-4628 (John Wiley & Sons, USA). 114, 446-456.

147. Katoch, Sunain; Sharma, Vinay; Kumar, Vinay; Kundu, P. P. (2009): Synthesis of Unsaturated Polyesters from Glycolyzed PET Waste and Characterization. J. of Polymer Engineering (Impact Factor: 0.5) ISSN: 0250-8079 (Freund Publishing House, London), 29/4, 199-211.

148. Kundu, P. P. and Larock, R. C. (2009): Effect of different Driers on the Structure and Properties of Thermally Polymerized Conjugated Linseed oil - Styrene - Divinylbenzene Copolymers.  Progress in Organic Coatings (Impact Factor: 3.0) ISSN: 0300-9440 (Elsevier Publishers, UK), 65/1, 10-18.

149. Kumari, K, Prasad, K. Kundu, P. P. (2009): Optimization of chlorpheniramine maleate (CPM) delivery by response surface methodology – four component modeling using various response times and concentrations of chitosan-alanine, glutaraldehyde and CPM.  EXPRESS Polymer Letters (Impact Factor: 3.0) ISSN 1788-618 X (Budapset University of Technology) 3/4,  207–218.

150. Kumari, Kamlesh, Sharma, Charu and Kundu, Patit. P. (2009): In-vitro Release of Metformin Hydrochloride from Films of Chitosan-Methylcellulose Blends. Asian Journal of Chemistry (I.F. 0.4), 21/10, 148-152.

 

Year 2008 (Twelve Publications)

151. Sharma, Vinay, Banait, J. S. and Kundu, P. P. (2008): Spectroscopic Characterization of Linseed Oil based Polymer Nano-composites. Polymer Testing (Impact Factor: 2.24) ISSN: 0142-9418 (Elsevier Sc, UK), 27, 916-923.

152. Sharma, Vinay and Kundu, P. P.: Synthetic Polymeric Vectors in Gene Therapy, Current Opinion in Solid State and Material Science (Impact Factor: 6.2), ISSN: 1359-0286 (Elsevier, UK), 12, 12, 89-102. doi:10.1016/j.cossms.2009.01.005.

153. Sharma, Vinay, Banait, J. S. and Kundu, P. P. (2008): 1H-NMR and FTIR Spectroscopic Characterization of linseed oil based polymers. Industrial & Engineering Chemistry Research (Impact Factor: 3.1) ISSN: 1520-5045 (American Chemical Society, USA), 47 (22), 8566-8571.

154. Kumari, K, Kundu, P. P., Cho, C.S.  (2008): Protein Delivery Using Chitosan Derivates. J. Chitin Chitosan, 13(4), 181-188. (Impact Factor: )

155. Roy Ghatak, Himadri, Kumar, Satish, and Kundu, P. P. (2008): Electrode processes in black liquor electrolysis and their significance for hydrogen production. International Journal of Hydrogen Energy (Impact Factor: 4.2) ISSN: 0360-3199 (Elsevier, UK), 33, 2904-2911.

156. Sharma, Vinay, Banait, J. S. and Kundu, P. P. (2008): Swelling Kinetics of Linseed Oil Based Polymers. Journal of Applied Polymer Science (Impact Factor: 1.9) ISSN: 1097-4628 (John Wiley & Sons, USA), 111, 1816-1827.

157. Sharma, Vinay,  Banait, J. S., Larock, R. C. and Kundu, P. P. (2008): Synthesis and Characterization of Styrene-co-Divinylbenzene graft-Linseed Oil by Free Radical Polymerization. EXPRESS Polymer Letters (Impact Factor: 3.1) ISSN 1788-618 X (Budapset University of Technology), 2, 265-276.

158. Sharma, Vinay and Kundu, P. P. (2008): Condensation Polymers from Natural Oils. Progress in Polymer Science (Impact Factor: 26.3), ISSN: 0079-6700 (Elsevier Publishers, UK), 33 (12), 1199-1215.

159. Kundu, P. P. and Singh, Ratan Pal (2008): Thermo-gelation of Methylcellulose from the Solution in N, N-Dimethylformamide and Characterization of the Transparent Gels, Journal of Applied Polymer Science (Impact Factor: 1.9) ISSN: 1097-4628 (John Wiley & Sons, USA), 110, 3031-3037.

160. Kundu, P. P. and Singh, Ratan Pal (2008): Effect of Addition of Surfactants on the Rheology of Gels from Methylcellulose in N N-Dimethylformamide, Journal of Applied Polymer Science (Impact Factor: 1.7) ISSN: 1097-4628 (John Wiley & Sons, USA), 108, 1871-1879.

161. Kumari K, Kundu PP (2008): Studies on In Vitro Release of CPM from Semi-Interpenetrating Polymer Network (semi-IPN) Composed of Chitosan & Glutamic Acid. Bulletin of Materials Science (Impact Factor: 1.0), ISSN: 0250-4707 Indian Academy of Sciences and Springer Sc, 31/2, 159-167.

162. Valverde, Marlen, Andjelkovic, Dejan, Kundu, Patit P., Larock, Richard C.  (2008): Conjugated Low Saturation Soybean Oil Thermosets: Free Radical Copolymerization with DCP and DVB. Journal of Applied Polymer Science; (Impact Factor: 1.9), ISSN: 1097-4628 (John Wiley & Sons, USA), 107/1, 423-430.

163. Kumari, Kamlesh and Kundu, P. P.  (2007): Kumari K, Raina KK, Kundu PP; Studies on the Cure Kinetics of Chitosan–Glutamic Acid using Glutaraldehyde as Crosslinker through Differential Scanning Calorimeter. Journal of Applied Polymer Science (Impact Factor: 1.9), ISSN: 1097-4628 (John Wiley & Sons, USA), 108, 681-688. (Impact Factor of 2008: 1.187)

 

Year 2007 (Four Publications)

164.  Henna, Phillip H., Andjelkovic, Dejan D.,  Kundu, Patit P., Larock, Richard C.: Biobased Thermosets from Free Radical Copolymerization of Conjugated Linseed Oil. Journal of Applied Polymer Science (Impact Factor: 1.9); ISSN: 1097-4628 (John Wiley & Sons, USA), 104, 979-985.

165. Kumari,. Kamlesh and Kundu, P. P. (2007): Semi-interpenetrating Polymer networks (IPNs) of Chitosan & l-Alanine for Monitoring the Release of Chlorphenramine maleate. Journal of Applied Polymer Science(Impact Factor: 1.9); ISSN: 1097-4628 (John Wiley & Sons, USA), 103, 3751-3757.

166.  Kundu, P. P.,  Kim, Beom Taek, Ahn, Ji Eun,  Han, Hak Soo and Shul, Yong Gun (2007):  Formation and Evaluation of Semi-IPN of Nafion for Direct Methanol Fuel Cell: 1. Crosslinked Sulfonated Polystyrene in the Pores of Nafion Membrane. Journal of Power Sources (Impact Factor: 6.9), ISSN: 0378-7753 (Elsevier Sc, UK), 171, 86-91.

167. Kundu, P. P., Sharma, Vinay and Shul, Yong Gun (2007): Composites of Proton conducting Polymer Electrolyte Membrane in Direct Methanol Fuel Cells. Critical Reviews in Solid State and Materials Sciences (Impact Factor: 6.5), ISSN: 1040-8436 (Taylor & Francis) 32, 51-66.

 

Year 2006 (Two Publications)

168. Pal, Ajay and Kundu, P. P. (2006): Electrolytic Polymeric Membranes for Fuel Cells – A Review, Reviews in Chemical Engineering (Impact Factor: 2.4); ISSN: 0167-8299 (Freund Publishing House, Israel), 22/3, 125-153.

169. Sharma, Vinay and Kundu, P. P. (2006): Addition Polymers from Natural Oils—A Review. Progress in Polymer Science (Impact Factor: 26.3) ISSN: 0079-6700 (Elsevier Publishers, UK), 31, 983-1006.

 

Year 2005 (One Publication)

 

170. Kundu, P. P. and Larock, R. C. (2005): Novel Conjugated Linseed oil-Styrene-Divinylbenzene Copolymers Prepared by Thermal Polymerization 1. Effect of Monomer Concentration on the Structure and Properties. Biomacromolecules (Impact Factor: 5.8) ISSN: 1526-4602 (American Chemical Society), 6/2, 797-806.

 

Year 2004 (Two Publications)

 

171. Kundu, P. P., Biswas, J., Kim, H., Shim, S. E., Choe, S. and Lee, D. S. (2004): Effect of Calcite and Calcite/Zeolite Hybrid Fillers on LLDPE and PP Composites. Advances in Polymer Technology (Impact Factor: 1.04), ISSN: 1098-2329 (John Wiley & Sons) 23/3, 230-238.

172. Kundu, P. P., Biswas, J., Kim, H., Chung, C. W. and Choe, S. (2004):  Effect of Different Film Preparation Procedures on Thermal, Morphological and Mechanical Properties of Pure and Calcite-Filled HDPE Films. Journal of Applied Polymer Science (Impact Factor: 1.9), ISSN: 1097-4628 (John Wiley & Sons, USA) 91, 1427-1434.

 

Year 2003 (Seven Publications)

 

173. Biswas, J., Kim, H., Kundu, P. P., Park, Y. and Choe, S. (2003):  Linear Low Density Polyethylene (LLDPE)/ Zeolite Microporous Composite Film. Macromolecular Research (Impact Factor: 1.6), ISSN: 1598-5032 (Korean Polymer society, Korea)11(5), 357-367.

174. Kundu, P. P., Verma, G. and Raina, K. K. (2003):  Influence of Different Polymers and their Molecular weight on the Textural and Electro-optical Behavior of Polymer-Dispersed Liquid Crystals. Journal of Applied Polymer Science (Impact Factor: 1.7), ISSN: 1097-4628 (John Wiley & Sons, USA) 87/2, 284-289.

175. Kundu, P. P., Kundu, M.,  Sinha, M.,  Choe, S. and Chattopadhay, D. (2003):  Effect of Alcoholic, Glycolic and Polyester Resin Additives on the Gelation of Dilute Solution (1%) of Methyl Cellulose. Carbohydrate Polymers (Impact Factor: 5.2), ISSN: 0144-8617 (Elsevier Publishers, UK) 51/1, 57-61.

176. Kundu, P. P. and Choe, S. (2003):  Transport of Moist Air through Micro-porous Polyolefin Films. Journal of Macromolecular Science – Reviews ISSN: 0736-6574 (Marcel Dekker Publisher, USA) 43/2, 143-186. (Impact Factor of 2008: 4.829).

177. Kukreja, T. R., Chauhan, R. C.,  Choe, S. and Kundu, P. P. (2003):  Effect of Doses and Nature of Vegetable oil on Carbon Black/Rubber Interactions: Studies on Castor oil and other Vegetable oils. Journal of Applied Polymer Science (Impact Factor: 1.7), ISSN: 1097-4628 (John Wiley & Sons, USA) 87/10, 1574-1578.

178. Kim, K. J., Kwon, S., Kim, H., Kundu, P. P., Kim, Y., Lee, Y., Lee, K. J.,  Lee, B. H. and Choe, S. (2003):  Influence of Mixing Cycle on the Degree of Mixing of Calcite-Filled Polyethylene upon Stretching. Journal of Applied Polymer Science (Impact Factor: 1.9), ISSN: 1097-4628 (John Wiley & Sons, USA)  87/2, 311-321.

179. Kundu, P. P., Biswas, J., Kim, H. and Choe, S. (2003):  Influence of Film Preparation Procedures on the Crystallinity, Morphology and Mechanical Properties of LLDPE Films. European Polymer Journal (Impact Factor: 3.7), ISSN: 0014-3057 (Elsevier Publishers, UK) 39, 1585-1593.

 

Year 2002 (Five Publications)

 

180. Kundu, P.P., Kukreja, T.R. (2002): Effect of chlorination of ground rubber tire on its compatibility with poly(vinyl chloride): Dielectric studies, Journal of Applied Polymer Science (Impact Factor: 1.9), ISSN: 1097-4628 (John Wiley & Sons, USA), 84 (5), pp. 993-1000.

181. Kundu, P. P. and Kukreja, T. R. (2002): Surface Modification of Carbon Black by Vegetable oil – its Effect on the Rheometric, Hardness, Abrasion, Rebound Resilience, Tensile, Tear and Adhesion Properties, Journal of Applied Polymer Science (Impact Factor: 1.9), ISSN: 1097-4628 (John Wiley & Sons, USA) 84, 256-260.

182. Kukreja, T. R., Kumar, D., Chauhan, R. C., Prasad, K., Choe, S. and Kundu, P. P. (2002):  Optimization of Physical and Mechanical Properties of Rubber Compounds by Response Surface Methodology - Two Component Modeling using Vegetable oil and Carbon Black. European Polymer Journal (Impact Factor: 3.7), ISSN: 0014-3057 (Elsevier Publishers, UK) 38, 1417-1422.

183. Kim, H., Kim, K. J., Kwon, S., Kundu, P. P., Jo, B. C., Lee, Y. K., Lee, K. J., Lee, B. H. and  Choe, S. (2002):  Comonomer Effect on the Mechanical and Morphological Behavior on the Calcite Filled PP, CoPP, and TerPP. Journal of Applied Polymer Science (Impact Factor: 1.9),  ISSN: 1097-4628 (John Wiley & Sons, USA) 86/8, 2041-2053.

184. Kwon, S., Kim, K. J., Kim, H., Kundu, P. P., Kim, T. J.,  Lee, Y. K., Lee, B. H. and Choe, S. (2002):  Tensile property and interfacial dewetting in the calcite filled HDPE, LDPE, and LLDPE composites. Polymer (Impact Factor 3.9), ISSN: 0032-3861 (Elsevier Publishers, UK) 43, 6901-6909.

 

Year 2001 (Three Publications)

 

185. Kundu, P. P. and Kundu, M. (2001): Effect of Salts and Surfactant and Their Doses on the Gelation of Extremely Dilute Solutions of Methyl Cellulose. Polymer (Impact Factor 3.9), ISSN: 0032-3861 (Elsevier Publishers, UK) 42/5, 2015-2020.

186. Sridhar, V., Prasad, K., Choe, S. and Kundu, P. P. (2001):  Optimization of Physical and Mechanical Properties of Rubber Compounds by a Response Surface Methodological Approach.  Journal of Applied Polymer Science (Impact Factor: 1.9),  ISSN: 1097-4628 (John Wiley & Sons, USA) 82/4, 997-1005.

187. Sridhar, V., Prasad, K., Choe, S., Kundu, P.P. (2001): Raman microimaging study of interfacial profiles of hydrogels,  Journal of Applied Polymer Science (Impact Factor: 1.9),  ISSN: 1097-4628 (John Wiley & Sons, USA), 82 (4), pp. 1040-1046.

 

Year 2000 (One Publication)

188. Kundu, P. P.  (2000):  Improvement of Filler-rubber interaction by the Coupling Action of Vegetable oil in Carbon Black Filled Reinforced Rubber.  Journal of Applied Polymer Science (Impact Factor: 1.9), ISSN: 1097-4628 (John Wiley & Sons, USA) 75, 735-739.

 

Year 1999 (One Publication)

189.   Kundu, P. P., Choudhury, R. N. P. and Tripathy, D. K. (1999):  Influence of Blend Compositions on the Physical, Flame Retardency, Dielectric, Ageing and Solvent Resistance Properties of Poly[ethylene-(vinylacetate)] and Polychloroprene.  Journal of Applied Polymer Science (Impact Factor: 1.9), ISSN: 1097-4628 (John Wiley & Sons, USA) 71(4), 551-556.

Year 1998 (One Publication)

190.   Kundu, P. P. and Tripathy, D. K. (1998):  Rheological Properties of Poly[ethylene-co-(methylacrylate)], Polychloroprene and their Blends. Polymer (Impact Factor 3.6),  ISSN: 0032-3861 (Elsevier Publishers, UK) 39/10, 1869-1864.

 

Year 1997 (Three Publications)

191.    Kundu, P. P., Tripathy, D. K and Gupta, B. R.  (1997): Blends of Poly[ethylene(vinyl-acetate)], and Polychloroprene- Studies on Capillary and Dynamic Flows.  Journal of Applied Polymer Science (Impact Factor: 1.9),  ISSN: 1097-4628 (John Wiley & Sons, USA) 63, 187-193.

192.     Kundu, P. P., Bhattacharya, A. K. and Tripathy, D. K. (1997): Rheological Properties of the Blends of Polychloroprene and  Poly[ethylene(vinylacetate)].  Journal. of Applied Polymer Science (Impact Factor: 1.9),  ISSN: 1097-4628 (John Wiley & Sons, USA) 66, 1759-1765.

193.    Kundu, P. P. and Tripathy, D. K. (1997): Influence of Filler-Polymer Interactions on the Cure Mismatch of Dissimilar Polymeric Blends.  Journal of Applied Polymer Science (Impact Factor: 1.9),  ISSN: 1097-4628 (John Wiley & Sons, USA) 64, 321-328.

 

Year 1996 (Six Publications)

194.     Kundu, P. P. and Tripathy, D. K. (1996):  Effect of Crystalline Parameters on Thermal Transitions and Mechanical Relaxations- Studies on Miscible Blends of Ethylene Vinyl Acetate Copolymers with Polychloroprene. Kautschuk Gummi Kunststoffe (Impact Factor: 0.2), ISSN: 0948-3276 (Huethig Publishers, Germany) 49/4, 268-273.

195.     Kundu, P. P., Banerjee, S. and Tripathy, D. K. (1996):  1HNMR and FTIR Spectroscopic Studies on the Blends of Polychloroprene with Polyethylene vinyl acetate. International Journal of Polymeric Materials ISSN: 1563-535X (Gordon- Breach Publishers, USA) 32, 125-134. (Impact Factor: ).

196.     Kundu, P. P., Tripathy, D. K. and Gupta, B. R. (1996): Effect of Rheological Parameters on the Miscibility and Polymer-Filler Interactions of the Black-Filled Blends of Polyethylene – Vinyl Acetate and Polychloroprene.  Journal of Applied Polymer Science (Impact Factor: 1.9),  ISSN: 1097-4628 (John Wiley & Sons, USA)  61, 1971-1983.

197.    Kundu, P. P., Banerjee, S. and Tripathy, D. K (1996):  Studies on the Miscibility of the blends of Polychloroprene and Poly(ethylene-methylacrylate) Copolymer.  Polymer (Impact Factor 3.6),  ISSN: 0032-3861 (Elsevier Publishers, UK)  37/12, 2423-2431.

198.     Kundu, P. P. and Tripathy, D. K (1996):  Effect of Fillers on the Properties of Poly(ethylene- vinyl acetate) 1:1 Blends with Polychloroprene. Polymer Networks & Blends ISSN: 0893-6684 (ChemTec Publishing, Canada)  6/2, 81-90. (Impact Factor: ).

199.     Kundu, P. P. and Tripathy, D. K. (1996): Melting Behaviour of Ethylene-Vinyl Acetate Copolymer Blends with Polychloroprene. Kautschuk Gummi Kunststoffe (Impact Factor: 0.2),  ISSN: 0948-3276 (Huethig Publishers, Germany)  49/10, 666-670.

 

Year 1995 (one Publication)

200.     Kundu, P. P. and Tripathy, D. K.  (1995): Blends of Polychloroprene with Ethylene-Vinyl Acetate Copolymer Miscibility Studies. Polymer Networks & Blends ISSN: 0893-6684 (ChemTec Publishing, Canada) 5/1, 11-18. (Impact Factor: ).

 

 

 

 

# # # # # | # # #
Credits : Information Management Group, IIT Roorkee
Copyright © , All Rights Reserved, Institute Computer Centre, IIT Roorkee.