|Name of Research Lab||Professor-in-Charge|
|Advanced Polymer & Fuel Cell Research Lab||Dr. P.P. Kundu|
|Biochemical Engineering Research Lab||Dr. B.Prasad|
|Bioenergy - Environmental Engineering Research Lab||Dr. C.B. Majumder|
|Complex Fluid Dynamics and Microfluidics (CFDM) Research Lab ▼||Dr. Ram P. Bharti|
|CFDM explores the forced and mixed convective hydrodynamic and heat transfer characteristics of complex non-Newtonian fluids flowing across bluff bodies and through microfluidic geometries of circular and non-circular cross-sections. CFDM has been using in-house developed solvers (based on FVM, LBM and Meshless methods), commercial tools (ANSYS FLUENT, COMSOL Multiphysics) and open-source tools (OpenFOAM, OpenLB, etc.). We are also developing the advanced numerical algorithms for the multiphysics simulations of microfluidics and complex fluid flow systems. Fuel cells have also been one of the focus of our research. Faculty Page | Lab Page|
|Computational Fluid Dynamics Research Lab||Dr. Amit K. Dhiman|
|Engineering of Catalysis and Reaction Kinetics Research Lab ▼||Dr. Prakash Biswas|
|Primary interest of our research group includes the design, synthesis, reaction study and reaction kinetic modelling for various industrially important reactions. We design and synthesize various shape and size selective nano-structured materials as heterogeneous catalysts for the application in the conversion of biomass into valuable chemicals and fuels, conversion of hydrocarbon, reforming, CO2 utilization, hydrogen production etc. Fundamental understanding the relationship between the catalysts structure, size, composition and their performance is also an important domain of our interest.|
|Energy and Environment Research Lab ▼||Dr. N. Siva Mohan Reddy|
|Our research group works on conversion of biomass into fuels through thermo-chemical and hydrothermal processes. We also work on impregnation of various (single & mixed) metal catalysts in the biomass and then gasify/liquefy them to enhance the fuel yields. We have started a new area on material synthesis using waste biomass. These materials have potential application for the antibacterial, antiviral and anticancer activities. The green synthesized biomaterials also find their applications towards toxic metal/pollutant removal, fuel cell, air purification and biological applications.|
|Flow and Instability Research Lab||Dr. Gaurav Sharma|
|Fluid Mechanics Research Lab||Dr. C. Veeramani|
|Heterogeneous Catalysis Research Lab||Dr. Taraknath Das|
|Mass Transfer Research Lab||Dr. Vimal Kumar|
|Molecular Simulations and Drug Delivery (MSDD) Research Lab ▼||Dr. Prateek K. Jha|
|Ongoing research in the MSDD laboratory are in the broad areas of controlled drug release, multiscale modeling of stimuli-responsive polymers, and computational design of catalysts. The laboratory has experimental facilities for drug dissolution testing such as USP dissolution apparatus (1&2), orbital incubating shaker, UV-vis spectrophotometer, and high-end computational workstations and software for quantum chemistry calculations, atomistic simulations, and multiphysics simulations.|
|Multiphase Flow Research Lab||Dr. Sumana Ghosh|
|Particle Technology Research Lab||Dr. Anshu Anand|
|Polymer Composite Research Lab||Dr. Shishir Sinha|
|Process Dynamics and Control Research Lab||Dr. V.K. Agarwal|
|Process Engineering Research Lab ▼||Dr. B. Mohanty
Dr. Shabina Khanam
|Process engineering research lab primarily focuses in the areas of process intensification and integration, process control, multiphase heat transfer, modelling, simulation and optimization of equipment and chemical Processes, energy and water Management in industries, water treatment, supercritical fluid extraction of natural products, clean coal technologies, bio-energy from biomass, hazard management, biodegradable polymer, fire engineering, etc. Both experimental and theoretical studies are carried out in this laboratory.|
|Sustainable Environment and Energy Research Lab||Dr. Vimal C. Srivastava|
|Sustainable Processing and Water Treatment Research Lab||Dr. Prasenjit Mondal|
Selected Recent International Refereed Journal Publications
- G. Sharma,
S. Ghoshand S. Karmakar. Computational fluid dynamic simulation of single and two phase vortex flow-A comparison of flow field and energy separation. Journal of Heat Transfer, 138, 82003(1-8) (2016). [ASME]
- R.P. Ram,
R.P. Bhartiand A.K. Dhiman. Forced convection flow and heat transfer across an in-line bank of circular cylinders. Canadian Journal of Chemical Engineering, 94(7), 1381-1395 (2016). [Wiley]
- S.M. Pudi,
P. Biswasand Shashi Kumar. Hydrogenolysis of glycerol to 1,2-propanediol over highly active and stable Cu/MgO catalysts. Journal of Chemical Technology and Biotechnology, 91, 2063-2075 (2016). [Wiley]
- N.N. Pandhare, S.M. Pudi,
P. Biswasand S. Sinha. Selective hydrogenolysis of glycerol to 1,2-propanediol over highly active and stable Cu/MgO catalyst in vapor phase. Organic Process Research & Development, 20, 1059−1067 (2016). [ACS]
- P. Kundu,
V. Kumar, Y. Haorau and I.M. Mishra. Numerical simulation and analysis of fluid flow hydrodynamics through porous media using Reynolds averaged Navier-Stokes and Large Eddy Simulation approach. Appliend Numerical Methods, 40, 9848-9871 (2016). [Elsevier]
- P. Kundu,
V. Kumarand I.M. Mishra. Experimental and numerical investigation of fluid flow hydrodynamics in porous media: characterization of Darcy and non-Darcy flow regimes. Powder Technology, 303, 278-291 (2016). [Elsevier] S. Ghosh, G. Das and P.K. Das. Liquid Buckling in a practical situation. Euro Physics Letters, 115, 44004 (2016). [IOP Science]
- K.M. Gangawane,
R.P. Bhartiand S. Kumar. Effects of heating location and size on natural convection in partially heated open ended enclosure by using lattice Boltzmann method. Heat Transfer Engineering, 37(6), 507-522 (2016). [Taylor & Francis] A.K. Dhiman. Flow and heat transfer phenomena around an equilateral triangular bluff body: effect of wall confinement. Heat Transfer - Asian Research, 45(7), 608-630 (2016). [Wiley]
- Vikash, D. Deshawar and
V. Kumar. Hydrodynamics and mixing characterization in a novel high shear mixer. Chemical Engineeing Processing: Process Intensification, 120, 57-67 (2017). [Elsevier]
- A.K. Varma and
P. Mondal. Pyrolysis of sugarcane bagasse in semi batch reactor: Effects of process parameters on product yields and characterization of products. Industrial Crops and Products, 95, 704-717 (2017). [Elsevier]
- L.S. Thakur and
P. Mondal. Simultaneous arsenic and fluoride removal from synthetic and real groundwater by electrocoagulation process: Parametric and cost evaluation. Journal of Environmental Management, 190, 102-112 (2017). [Elsevier]
- K. Singh,
P.K. Jhaand S. Satapathi. Controllable Bulk Heterojunction Morphology by Self-Assembly of Oppositely Charged Nanoparticles. Journal of Physical chemistry C, 121, 16045–16050 (2017). [ACS]
- A. Sanyal and
A.K. Dhiman. Wake interactions in a fluid flow past a pair of side-by-side square cylinders in presence of mixed convection. Physics of Fluids, 29(10), 103602(1–26) (2017). [AIP]
- V.K. Rathore and
P. Mondal. Competitive adsorption of arsenic and fluoride onto economically prepared aluminum oxide/hydroxide nanoparticles: Multicomponent isotherms and spent adsorbent management. Industrial & Engineering Chemistry Research, 56, 8081-8094 (2017). [ACS]
- D.V. Naik, V. Karthik,
V. Kumar, B. Prasadand M.O. Garg. Kinetic modeling for catalytic Cracking of pyrolysis oils with VGO in a FCC unit. Chemical Engineering Science, 170, 790-798 (2017). [Elsevier]
- S. Mondal, Al Ameen A and
P. Biswas. Catalytic performance and reaction mechanism study over highly stable and efficient Cu-Zn/MgO catalyst for hydrogenolysis of glycerol to 1,2-propanediol. Catalysis Letters, 147, 2783–2798 (2017). [Springer]
- R.D. Manga and
P.K. Jha. Mathematical models for controlled drug release through pH-responsive polymeric hydrogels. Journal of Pharmaceutical Sciences, 106(2), 629-638 (2017). [Elsevier]
- S. Malhotra and
S. Ghosh. Air-water flow through a single serpentine channel-Flow pattern and pressure drop. International Journal of Multiphase Flow, 96, 48-55 (2017). [Elsevier] V. Kumar, Vikash, K.D.P. Nigam. Multiphase fluid flow and heat transfer characteristics in Minichannels. Chemical Engineering Science, 169, 34-66 (2017). [Elsevier]
- D. Kumar and
A.K. Dhiman. Effects of shear-thinning nature and opposing buoyancy from a square geometry in a confined framework. Numerical Heat Transfer, 72(6), 433-457 (2017). [Taylor & Francis]
- R.S. Katiyar and
P.K. Jha. Phase behavior of aqueous polyacrylic acid solutions using atomistic molecular dynamics simulations of model oligomers. Polymer, 114, 266-276 (2017). [Elsevier]
- N. Jangir, P. Dwivedi and
S. Ghosh. Design of a hydrodynamic cavitating reactor. Chemical Engineeing Processing: Process Intensification, 122, 128-142 (2017). [Elsevier]
- G.K. Gaurav and
S. Khanam. Profitability analysis of power generation using waste heat of sponge iron process. Energy, 141, 333-347 (2017). [Elsevier]
- Al Ameen A, S. Mondal, S.M. Pudi, N.N. Pandhare and
P. Biswas. Liquid phase hydrogenolysis of glycerol over highly active 50%Cu-Zn (8:2)/MgO catalyst: reaction parameter pptimization by using response surface methodology (RSM). Energy & Fuel, 31(8), 8521–8533 (2017). [ACS]
- G.K. Silori and
S. Khanam. Performance analyses of LP and MILP solvers based on newly introduced scale: Case studies of water network problems in chemical processes. Chemical Engineering Research and Design, 136, 417-430 (2018). [Elsevier]
- M. Shah, S. Das, A. K. Nayak,
P. Mondaland A. Bordoloi. Smart designing of metal-support interface for imperishable dry reforming catalyst. Applied Catalysis A: General, 556, 137-154 (2018). [Elsevier]
- A. Sanyal and
A.K. Dhiman. Effect of thermal buoyancy on a fluid flowing past a pair of side–by–side square bluff–bodies in a low–Reynolds number flow regime. Physics of Fluids, 30(6), 063603(1-33) (2018). [AIP]
- V.K. Rathore and
P. Mondal. Life cycle assessment of defluoridation of water using laterite soil based adsorbents. Journal of Cleaner Production, 180, 716-727 (2018). [Elsevier]
- V. Ramanaiah and
S. Khanam. Modified approach of total site integration for energy conservation: A case study of sponge iron cluster. Chemical Engineering Research and Design, 133, 142-154 (2018). [Elsevier]
- Priyanka and
S. Khanam. Influence of operating parameters on supercritical fluid extraction of essential oil from turmeric root. Journal of Cleaner Production, 188, 816-824 (2018). [Elsevier]
- Priyanka and
S. Khanam. Selection of suitable model for different matrices of raw materials used in supercritical fluid extraction process. Separation Science and Technology, 53, 71-96 (2018). [Elsevier]
- N.N. Pandhare, S.M. Pudi, S. Mondal, K. Pareta, M. Kumar and
P. Biswas. Development of kinetic model for hydrogenolysis of glycerol over Cu/MgO catalyst in a slurry reactor. Industrial Engineering & Chemistry Research, 57, 101-110 (2018). [ACS]
- S. Malhotra and
S. Ghosh. Effect of GDL surface wettability gradient on water behavior in a serpentine gas flow channel of proton exchange membrane fuel cell. Journal of Fluids Engineering, 140, 81302(1-9) (2018). [ASME]
- R. Kumar, V. Pancholi and
R.P. Bharti. Material flow visualization and determination of strain rate during friction stir welding. Journal of Material Processing Technology, 255, 470-476 (2018). [Elsevier]
- R.S. Katiyar and
P.K. Jha. Molecular Simulations in Drug Delivery: Opportunities and Challenges. WIREs Computational Molecular Science, 8(4), e1358 (2018). [Wiley]
- R.S. Katiyar and
P.K. Jha. Molecular insights into the effects of media-drug and carrier-drug interactions on pH-responsive drug carriers. Molecular Pharmaceutics, 15(6), 2479 (2018). [ACS]
- K.M. Gangawane and
R.P. Bharti. Computational analysis of MHD natural convection in partially-differentially heated cavity: effect of cooler size. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 232(3), 515-528 (2018). [IMechE]
- A. Bhattacharyya, F. Nasim, R. Mishra,
P.P. Kunduand R.P. Bharti. Polyurethane incorporated Chitosan/alginate core-shell nanoparticles for controlled oral insulin delivery. Journal of Applied Polymer Science, 135(26), 46365(01-15) (2018). [Wiley]
- M. Asif and
A.K. Dhiman. Analysis of laminar flow across a triangular periodic array of heated cylinders. Brazilian Society of Mechanical Sciences and Engineering, 40(7), 350(1-24) (2018). [Springer]
List of Authored/Edited Books
Petrochemical Process Technology.
I.D. Mall. Macmillan India Ltd., New Delhi (2006). ISBN: 978-1403931979 Polymeric Systems & Applications, 1st edition.
Shishir Sinhaand Vinay Kumar. Studium Press (India) Pvt. Ltd., New Delhi (2010). ISBN: 978-9380012100 Advances in Polymeric Science.
Shishir Sinha, O.P. Pandey, Vinay Kumar and Parmod Kumar (Editors). Studium Press (India) Pvt. Ltd., New Delhi (2011). ISBN: 978-9380012513 Nanotechnology Vol. 1: Fundamentals and Applications, 1st edition.
Naveen Kumar Navani,
Shishir Sinha(Editors) and J.N. Govil (Exec. Editor) Studium Press LLC, New Delhi (2013). ISBN: 978- 1626990018 Nanotechnology Vol. 2: Synthesis and Characterization, 1st edition.
Shishir Sinha, Naveen Kumar Navani (Editors) and J.N. Govil (Exec. Editor) Studium Press LLC, New Delhi (2013). ISBN: 978-1626990026 Nanotechnology Vol. 3: Properties of Nanomaterials, 1st edition.
Shishir Sinha, Naveen Kumar Navani (Editors) and J.N. Govil (Exec. Editor) Studium Press LLC, New Delhi (2013). ISBN: 978-1626990034 Nanotechnology Vol. 4: Nanomaterials and Nanostructures, 1st edition.
Naveen Kumar Navani,
Shishir Sinha(Editors) and J.N. Govil (Exec. Editor) Studium Press LLC, New Delhi (2013). ISBN: 978-1626990042 Nanotechnology Vol. 5: Defence Applications, 1st edition.
Naveen Kumar Navani,
Shishir Sinha(Editors) and J.N. Govil (Exec. Editor) Studium Press LLC, New Delhi (2013). ISBN: 978-1626990050 Nanotechnology Vol. 6: Energy and Environment, 1st edition.
Shishir Sinha, Naveen Kumar Navani (Editors) and J.N. Govil (Exec. Editor) Studium Press LLC, New Delhi (2013). ISBN: 978-1626990069 Nanotechnology Vol. 7: Diagnostics and Therapeutics, 1st edition.
Naveen Kumar Navani,
Shishir Sinha(Editors) and J.N. Govil (Exec. Editor) Studium Press LLC, New Delhi (2013). ISBN: 978-1626990077 Nanotechnology Vol. 8: Electronics and Photovoltaics, 1st edition.
Shishir Sinha, Naveen Kumar Navani (Editors) and J.N. Govil (Exec. Editor) Studium Press LLC, New Delhi (2013). ISBN: 978-1626990085 Nanotechnology Vol. 9: Construction Engineering, 1st edition.
Shishir Sinha, Naveen Kumar Navani (Editors) and J.N. Govil (Exec. Editor) Studium Press LLC, New Delhi (2013). ISBN: 978-1626990093 Nanotechnology Vol. 10: Nanosensing, 1st edition.
Naveen Kumar Navani,
Shishir Sinha(Editors) and J.N. Govil (Exec. Editor) Studium Press LLC, New Delhi (2013). ISBN: 978-1626990107 Nanotechnology Vol. 11: Biomaterials, 1st edition.
Naveen Kumar Navani,
Shishir Sinha(Editors) and J.N. Govil (Exec. Editor) Studium Press LLC, New Delhi (2014). ISBN: 978-1626990115 Nanotechnology Vol. 12: Bioimaging, 1st edition.
Shishir Sinha, Naveen Kumar Navani (Editors) and J.N. Govil (Exec. Editor) Studium Press LLC, New Delhi (2014). ISBN: 978-1626990123 Fire Research and Engineering.
Akhilesh Gupta, Ravi Kumar,
Shashi, Amit Dhiman, Surendra Kumar, and Pavan K. Sharma (Editors). Narosha Publishing House Pvt. Ltd., New Delhi (2014). ISBN: 978-8184873955 Fertilizer Technology I: Synthesis, 1st edition.
Shishir Sinha, K.K. Pant and Shailendra Bajpai (Editors) and J.N. Govil (Acquisition Editor) Studium Press LLC, New Delhi (2015). ISBN: 978-1626990441 Fertilizer Technology II: Biofertilizer, 1st edition.
Shishir Sinha, K.K. Pant and Shailendra Bajpai (Editors) and J.N. Govil (Acquisition Editor) Studium Press LLC, New Delhi (2015). ISBN: 978-1626990456 Petroleum Refining Technology, 1st edition.
I.D. Mall. CBS Publishing, New Delhi (2015). ISBN: 978-8123925431 Petrochemical Process Technology, 2nd edition.
I.D. Mall. Laxmi Publications, New Delhi (2017). ISBN: 978-9351381389 Sustainable Utilization of Natural Resources.
P. Mondaland A.K. Dalai (Editors). CRC Press(2017). ISBN: 978-1498761840 Progress and Recent Trends in Microbial Fuel Cells, 1st edition.
K. Dutta and
P.P. Kundu(Editors). Elsevier(2018). doi:10.1016/C2016-0-04695-8 ISBN: 978-0444640178
V.C. Srivastava, I.M. Mishra and S. Suresh. Oxygen Mass Transfer in Bioreactors. In: Murray Moo-Young (Ed.) Comprehensive Biotechnology Volume 2: Engineering Fundamentals in Biotechnology, 2nd edition. Chapter 69, pp 947-956 (2011). Elsevier. DOI: 10.1016/B978-0-08-088504-9.00409-8
- P. R. Potti and
V.C. Srivastava. Effect of dopants on ZnO mediated photocatalysis of dye bearing wastewater: a review. In: A. Bansal R.J. Tayade (Ed.) Photocatalytic Materials & Surfaces for Environmental Cleanup IV, Materials Science Forum, Volume 757, pp. 165-174 (2013). Trans Tech Publications, Switzerland. DOI:10.4028/www.scientific.net/MSF.757.165 V.C. Srivastavaand I.D. Mall. Cleaner production practices for sustainable development of pulp and paper industries. In: S.N. Kaul, D.R. Saini and B.N. Rai (Eds.) Environmental Science and Engineering: Selected Topics. pp 219-229 (2013). Daya Publishing House, New Delhi.
- Ayushi Verma,
Shashi Kumarand Surendra Kumar. Fermentation of starch and starch-based packing peanuts for ABE production: kinetic study. In: S. Sonawane, Y.P. Setty and S.N. Sapavatu (Eds.) Chemical and Bioprocess Engineering, 1st edition. Chapter 27, pp 293-298 (2015). Apple Academic Press.
- Neetu Singh and
C. Balomajumder. Simultaneous removal of phenol and cyanide from aqueous solution using low cost adsorbent: optimization of process parameters and isotherm modeling. In: G.C. Mishra and S.K. Yadav (Eds.) Energy Research and Environmental Management: An Innovative Approach. pp 28-34 (2015). Krishi Sanskriti Publications, New Delhi.
- B. Kumar,
Shashi Kumarand Surendra Kumar. Methane production by butanol decomposition: thermodynamic analysis. In: S. Sonawane, Y.P. Setty and S.N. Sapavatu (Eds.) Chemical and Bioprocess Engineering, 1st edition. Chapter 27, pp 293-298 (2015). Apple Academic Press.
- A.K. Verma and
P. Mondal. Thermochemical characterization of pine needles as a potential source of energy. In: S. Kumar, S.K. Khanal, and Y.K. Yadav (Eds.) Proceedings of the First International Conference on Recent Advances in Bioenergy Research, Part of the Springer Proceedings in Energy book series (SPE). Chapter 19, pp 257-266 (2016). Springer India, New Delhi. DOI: 10.1007/978-81-322-2773-1_19
- V.N. Venkatesan, K.-P. Weiss,
R.P. Bharti, H. Neumann and R. Ramalingam. Strain calibration of substrate-free FBG sensors at cryogenic temperature. In: Mandler B. et al. (Eds.) Internet of Things. IoT Infrastructures. IoT360 2015. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering (LNICST) book series, Volume 170. Chapter 24, pp 191-202 (2016). Springer, Cham. DOI: 10.1007/978-3-319-47075-7_24
- Seema Singh,
V.C. Srivastavaand S.L. Lo. Surface modification or doping of WO3 for enhancing the photocatalytic degradation of organic pollutant containing wastewaters: a review. In: R.J. Tayade (Ed.) Photocatalytic Materials & Surfaces for Environmental Cleanup IV, Materials Science Forum, Volume 855, pp. 105-126 (2016). Trans Tech Publications, Switzerland. DOI:10.4028/www.scientific.net/MSF.855.105
- S. Das and
V.C. Srivastava. Microfluidic-based photocatalytic microreactor for environmental application: A review of fabrication substrates and techniques, and operating parameters. In: R.J. Tayade (Ed.) Photocatalytic Materials & Surfaces for Environmental Cleanup IV, Materials Science Forum, Volume 855, pp. 156-167 (2016). Trans Tech Publications, Switzerland. DOI:10.4028/www.scientific.net/MSF.855.156
- R. Shankar, N. Pathak, A.K. Chaurasia,
P. Mondaland S. Chand. Energy production through microbial fuel cells. In: P. Mondal and A.K. Dalai (Eds.) Sustainable Utilization of Natural Resources, 1st edition. Chapter 12, pp. 353-380 (2017). CRC Press.
- M. Shah,
P. Mondal, A.K. Nayak and A. Bordoloi. Hydrogen from natural gas. In: P. Mondal and A.K. Dalai (Eds.) Sustainable Utilization of Natural Resources, 1st edition. Chapter 4, pp. 81-120 (2017). CRC Press.
- S. Saroha,
P. Mondaland D. Tandon. Downstream processing of heavier petroleum fractions. In: P. Mondal and A.K. Dalai (Eds.) Sustainable Utilization of Natural Resources, 1st edition. Chapter 3, pp. 55-80 (2017). CRC Press.
- A.K. Ray,
P. Mondaland A. Kumar. Sustainability issues in the twenty-first century and introduction to sustainable ways for utilization of natural resources. In: P. Mondal and A.K. Dalai (Eds.) Sustainable Utilization of Natural Resources, 1st edition. Chapter 1, pp. 1-18 (2017). CRC Press.
- V.K. Rathore, L.S. Thakur and
P. Mondal. Life cycle analysis as the sustainability assessment multicriteria decision tool for road transport biofuels. In: P. Mondal and A.K. Dalai (Eds.) Sustainable Utilization of Natural Resources, 1st edition. Chapter 20, pp. 567-580 (2017). CRC Press. P. Mondal, P. Kumari, J. Singh, S. Verma, A.K. Chaurasia and R.P. Singh. Oil from algae. In: P. Mondal and A.K. Dalai (Eds.) Sustainable Utilization of Natural Resources, 1st edition. Chapter 8, pp. 213-254 (2017). CRC Press. P.P. Kunduand S. Mondal. Polybenzimidazole as membranes in direct methanol fuel cells. In: B. Dewangan and M. Yenkie (Eds.) Novel Applications in Polymers and Waste Management, 1st edition. Chapter 4, pp. 55-74 (2018). Apple Academic Press, New York.
- Piyush Kumar,
R.P. Bharti, Vikash Kumar and P.P. Kundu. Polymer electrolyte membranes for microbial fuel cells: Part A. Nafion-based membranes. In: K. Dutta and P.P. Kundu (Eds.) Progress and Recent Trends in Microbial Fuel Cells, 1st edition. Chapter 4, pp. 47-72 (2018). Elsevier. DOI: 10.1016/B978-0-444-64017-8.00004-X
- S.D. Laha, K. Dutta and
P.P. Kundu. Biodegradation of Low Density Polyethylene Films. In: V.M. Pathak and Navneet (Eds.) Handbook of Research on Microbial Tools for Environmental Waste Management. Chapter 14, pp. 282-318 (2018). IGI Global. DOI: 10.4018/978-1-5225-3540-9.ch014
- R. Rudra, V. Kumar, A. Nandy and
P.P. Kundu. Performances of separator and membraneless microbial fuel cell. In: D. Das (Ed.) Microbial Fuel Cell- A Bioelectrochemical System that Converts Waste to Watts, 1st edition. Chapter 7, pp. 125-140 (2018). Springer International Publishing. DOI: 10.1007/978-3-319-66793-5_7
- A. Chatterjee and
P.P. Kundu. The therapeutic role of the components of Aloe vera in activating the factors that induce osteoarthritic joint remodeling. In: B. Dewangan and M. Yenkie (Eds.) Novel Applications in Polymers and Waste Management, 1st edition. Chapter 13, pp. 137-266 (2018). Apple Academic Press, New York.
List of Awarded Ph.D. and Recently Defended Thesis
Supercritical fluid extraction of turmeric root and carrot seed and its analysis.
Priyanka 2018 Dr. Shabina Khanam Acetone - Butanol - Ethanol mixture from H2 production: thermodynamic and exergy analysis.
Brajesh Kumar 2018 Dr. Shishir Sinha Nucleate pool boiling of nanoparticle based fluids.
Somesh Bhambi 2018 Dr. V.K. Agarwal Studies on removal of fluoride and arsenic from contaminated water.
Vineet Kumar Rathore 2018 Dr. P. Mondal Stability of surfactant-laden liquid film flow down a flexible inclined plane.
Dharmendra Singh Tomar 2018 Dr. Gaurav Sharma Electrochemical treatment of petrochemical wastewater.
Vishal Kumar Sandhwar 2018 Dr. B. Prasad Advanced treatment for removal of chromium and fluoride from industrial waste water.
Gaikwad Mahendra Shivaji 2018 Dr. C.B. Majumder Biosorptive removal of heavy metals using sargassum filipendula from waste water.
Ayushi Verma 2018 Dr. C.B. Majumder Studies on the synthesis of catalysts for diethyl carbonate production.
Kartikeya Shukla 2018 Dr. V.C. Srivastava The development of meshless local Petrov Galerkin (MLPG) method for complex fluid flow simulation.
Vijay Kumar Verma 2018 Dr. Ram P. Bharti Periodic flow of non-Newtonian fluids across an array of cylinders.
Ram Pravesh Ram 2018 Dr. A.K. Dhiman and Dr. Ram P. Bharti Pyrolysis kinetics of biomass feedstocks and bio-oil production.
Anil Kumar Varma 2017 Dr. P Mondal Energy conservation in coal based sponge iron process using heat of waste gas.
Gajendra Kumar Gaurav 2017 Dr. Shabina Khanam Non-Newtonian flow over a heated square bluff body under buoyancy.
Deepak Kumar 2017 Dr. A.K. Dhiman Preparation and characterization of coir and banana fiber reinforced LDPE composites.
Nirupama 2017 Dr. V.K. Agarwal and Dr. Shishir Sinha Treatment of arsenic and fluoride bearing water and wastewater.
Lokendra Singh Thakur 2017 Dr. P. Mondal Simulation of biomass gasification in a fluidized bed reactor using CFD.
Umesh Kumar 2017 Dr. V.K. Agarwal Fire and explosion analysis involving LPG and LNG.
Nilambar Bariha 2017 Dr. V.C. Srivastava and Dr. I.M. Mishra Investigation on liquid fuel fires in a compartment.
Deepak Sahu 2017 Dr. Shashi, Dr. Akhilesh Gupta and Dr. Shorab Jain Phenol and cyanide removal from mono and binary synthetic simulated and real coke wastewater.
Neetu Singh 2017 Dr. C.B. Majumder Vapor phase hydrogenolysis of glycerol over non-noble metal catalysts.
Nitin Naresh Pandhare 2017 Dr. Prakash Biswas and Dr. Shishir Sinha Thermo-chemical modifications of teff straw for chromium removal from aqueous solution.
Abrham Bayeh Wassie 2017 Dr. V.C. Srivastava Studies on removal of arsenic from wastewater.
Mousumi Saha Podder 2017 Dr. C.B. Majumder Adsorptive desulfurization and denitrogenation by metal impregnated activated carbon.
Thaligari Sandeep Kumar 2017 Dr. V.C. Srivastava and Dr. B. Prasad Simulaion of single char particle gasification in conditions of a coal gasifier.
Vinod Kumar Yadav 2016 Dr. Vineet Kumar and Dr. C.B. Majumder Preparation and characterization of bagasse-wheat straw fiber/epoxy blended composites.
Varun Mittal 2016 Dr. Shishir Sinha Synthesis and characterization of catalysts for dimethyl carbonate production.
Praveen Kumar 2016 Dr. V.C. Srivastava and Dr. I.M. Mishra Flow of emulsions through porous media.
Partha Kundu 2016 Dr. Vimal Kumar and Dr. I.M. Mishra Electrochemical treatment of synthetic purified terephthalic acid wastewater.
Krishan Kishor Garg 2016 Dr. B. Prasad Removal of nitrogenous heterocyclic compounds from aqueous solution.
Hiwarkar Ajay Devidas 2016 Dr. I.D. Mall and Dr. V.C. Srivastava CFD studies and effect of rheology on hollow-fiber.
Gupta Ravikant Radhysham 2016 Dr. Shri Chand and Dr. Vineet Kumar Coprocessing of pyrolysis oil with VGO in FCC unit to produce LPG and gasoline.
Desavath Viswanatha Naik 2016 Dr. Vimal Kumar, Dr. B. Prasad and Dr. M.O. Garg Removal of chromium and phenol from single and binary simulated synthetic tannery wastewater.
Ankur Gupta 2016 Dr. C.B. Majumder Influence of surfactants on the formation and dissociation of gas hydrates in fixed bed media.
Amit Arora 2016 Dr. C.B. Majumder and Dr. Rajnish Kumar Performance characteristics of warm mix asphalt.
Ambika Behl 2016 Dr. V.K. Agarwal, Dr. Satish Chandra and Dr. S. Gangopadhyay Selective alkylation of benzene with ethanol using modified HZSM-5 to produce ethylbenzene.
Abdi Nemera Emana 2016 Dr. Shri Chand Studies on solvent extractive desulfurization of gas oil.
Sunil Kumar 2015 Dr. V.C. Srivastava and Dr. S.M. Nanoti (IIP Dehradun) Hydrogenolysis of glycerol to 1,2 propanediol over supported copper and nickel catalysts.
Satyanarayana Murty Pudi 2015 Dr. P. Biswas and Dr. Shashi Numerical simulations of problems of flow, heat and mass transfer in nanofluids.
Maniya 2015 Dr. R. Bhargava Treatment of Bisphenol-A contaminated water by advanced oxidation process.
Jyoti 2015 Dr. I.M. Mishra and Dr. Vineet Kumar Convective flow and heat transfer analysis by using thermal lattice Boltzmann method.
Krunal Madhukar Gangawane 2015 Dr. Ram P. Bharti and Dr. Surendra Kumar Modeling and response surface analysis of supercritical fluid extraction of vegetable oil.
Amit Rai 2015 Dr. B. Mohanty Non-Newtonian flow and heat transfer around triangular bluff bodies.
Richa Agarwal 2015 Dr. A.K. Dhiman .
Bhumika Agarwal 2015 Studies on co-removal of phenol and cyanide from coke waste water.
Bhumica Agarwal 2014 Dr. C.B. Majumder Electrochemical treatment of dye bearing wastewater.
Seema Singh 2014 Dr. I.D. Mall and Dr. V.C. Srivastava Nucleate pool boiling of liquids and their mixtures on coated horizontal tubes.
Chandra Kishore 2014 Dr. V.K. Agarwal and Dr. R. Bhargava Treatment of petroleum refinery waste water.
Chankdrakant Thakur 2014 Dr. I.D. Mall Arsenic removal from contaminated water: a comparative study for various treatment methods.
Suantak Kamsonlian 2014 Dr. Shri Chand and Dr. C.B. Majumder .
Richa Agarwal 2014 Removal of toxic organics from waste water and energy production using EC and MFC.
Ravi Shankar 2013 Dr. P. Mondal and Dr. Shri Chand Catalytic wet peroxidation of nitrogenous aromatic compounds.
V. Subbaramiah 2013 Dr. I.D. Mall and Dr. V.C. Sivastava Modeling and simulation studies on methanol reforming for hydrogen production.
Nisha Katiyar 2013 Dr. Shashi and Dr. Surendra Kumar CFD analysis of non-Newtonian mixed convection around a bluff body.
Neha Mittal 2013 Dr. Surendra Kumar and Dr. A.K. Dhiman Simultaneous adsorption and biodegradation of cyanide and industrial wastewater.
Neha Gupta 2013 Dr. C.B. Majumder and Dr. V.K. Agarwal Production of fungal xylanase using agricultural residues.
Debabrata Garai 2012 Dr. Vineet Kumar Studies on treatment of petrochemical wastewaters.
Shilpi Verma 2012 Dr. B. Prasad Development of surface modified macroporous PMMA-DVB and PS-EGDM based ion exchanger.
Gagnesh Sharma 2012 Dr. Shashi and Dr. Shishir Sinha Biological removal of zinc from industrial effluent.
Vishal Mishra 2012 Dr. V.K. Agarwal and Dr. C.B. Majumder Synthesis of polymer supported metal catalysts and oxidation of organic compounds.
Sweta 2012 Dr. Shishir Sinha and Dr. Shri Chand Microbial production of polyhydroyalkanoates and renewable materials.
Mohd. Zafar 2012 Dr. Shashi and Dr. A.K. Dhiman Biodegradation dynamics of phenolic wastewaters by using Gilomastix indicus MTCC 3869.
Deepika Arya 2012 Dr. Surendra Kumar and Dr. Shashi Analytical and approximate solutions of selected chemical engineering models.
Mohd. Danish 2012 Dr. Surendra Kumar and Dr. Shashi Simulation of multiple effect evaporators with and without fouling.
Divya Srivastava 2011 Dr. B. Mohanty and Dr. R. Bhargava Dairy wastewater treatment by physico-chemical methods and sequential batch reactor.
J.P. Kushwaha 2011 Dr. I.D. Mall and Dr. V.C. Srivastava Bioethanol production from biomass using thermophiles.
Sachin Kumar 2011 Dr. I.M. Mishra, Dr. S.P. Singh and Dr. D.K. Adhikari Multicomponent adsorption of phenolic compounds from aqueous solution.
S. Suresh 2010 Dr. V.C. Srivastava and Dr. I.M. Mishra Modeling of catalytic reactors for syngas production by dry reforming of methane.
Sheeba Jilani 2010 Dr. Surendra Kumar and Dr. Shashi CFD Analysis of Tunnel Fires.
Soharaib Jain 2010 Dr. Surendra Kumar and Dr. T.P. Sharma Studies on polymer-bagasse fibre composite for application as building material.
Subodh Prakash Agarwal 2010 Dr. I.D. Mall and Dr. C.L. Verma Development of a digital control strategy of continuous distillation column.
S. K. Saini 2009 Dr. V.K. Agarwal and Dr. Vijay Kumar Kinetic modeling and experimental studies on production of biopolymers using microorganisms.
Anjana Nandasana 2009 Dr. Surendra Kumar Intensification of recovery of carboxylic acid by reactive extraction.
Amit Keshav 2009 Dr. Kailash Wasewar Dr. Shri Chand Development of a digital control strategy of continous distillation column.
Kallu Upendra Reddy 2009 Dr. Nidhi Bhandari and Dr. B. Mohanty Removal of arsenic from water by surface modified adsorbents and immobilized whole cells.
P. Mondal 2008 Dr. C.B. Majumder and Dr. B. Mohanty Enhanced boiling of water-methanol mixtures on coated surfaces.
Siraj Alam 2008 Dr. S.C. Gupta and Dr. V.K. Agarwal Performance of an UASB reactor for the treatment of catechol and resorcinol.
R. Subarmanium 2008 Dr. I.M. Mishra and Dr. S.D. Bhattacharya Treatment of textile mill waste water.
Pradeep Kumar 2008 Dr. Shri Chand and Dr. B. Prasad Removal of acrylonirile and acrylic from aqueous solution using adsorption.
Arvind Kumar 2008 Dr. B. Prasad Synthesis of multiple effect evaporator system.
Shabina Khanam 2007 Dr. B. Mohanty Catalytic activities of metal complexes immobilized in zeolite-Y.
Anil Kumar Chandrakar 2007 Dr. Shri Chand Studies of the biodegradation of volatile organic compounds in biofilters.
Anil Kumar Mathur 2007 Dr. C.B. Majumder Electrochemical treatment of wastewater from agri-based pulp mill.
S. Mahesh 2007 Dr. I.D.Mall and Dr. B. Prasad Adsorptive treatment of pyridine and its derivatives from wastewaters.
Dilip H. Lataye 2007 Dr. I.D. Mall and Dr. I.M. Mishra Heavy metals removal from aqueous solution using low-cost adsorbents.
Vimal Chandra Srivastava 2006 Dr. I.D. Mall Treatment of distillery wastewater.
Parmesh Kumar Chaudhari 2006 Dr. Shri Chand and Dr. I.M. Mishra A study of nucleate boiling of saturated liquids on copper coated heating tube surface.
Mihir Kumar Das 2006 Dr. S.C. Gupta and Dr. V.K. Agarwal Simulation of flat falling film evaporator network.
Ravindra Bhargava 2005 Dr. B. Mohanty Enhanced boiling of saturated liquids on copper coated heating tube surface.
Laljee Prasad 2005 Dr. S.C. Gupta and Dr. V.K. Agarwal Studies on kinetic and modelling of lglutamic acid fermentation.
Mohd. Noor Salam Khan 2005 Dr. I.M. Mishra Treatment of black liquor using thermochemical precipitation followed by wet oxidation.
Anurag Garg 2005 Dr. Shri Chand Studies on compartment fires.
Rajiv Kumar 2004 Dr. A.K. Gupta and Dr. Surendra Kumar Thermal cracking of petroleum feedstocks: Kinetics and process modeling studies.
Jasvinder Singh 2004 Dr. Surendra Kumar Nucleate pool boiling of saturated liquids on ptfe coated horizontal heating tube.
Swapan Bhomic 2003 Dr. S.C. Gupta and Dr. V.K. Agarwal Studies on modelling of high pressure polyethlylene reactor.
Chandrajit Balomajumder 2002 Dr. Surendra Kumar Biomass characterization and gasification in a fluidized bed.
P.B. Gangavati 2002 Dr. I.M. Mishra and Dr. B. Prasad Heat transfer in agitated Newtonian and non-Newtonian liquids.
Yisaye Kindie Adem 2002 Dr. S.D. Bhattacharya and Dr. S.C. Gupta Studies on gas- solid heat transfer in cyclone.
Anuj Jain 2002 Dr. B. Mohanty, Dr. S.K. Agrawal and Dr. B. Pitchumani Studies on adsorption and bioregeneration process in gas Systems.
Arinjay Kumar 2001 Dr. Jaia Lal and Dr. S. Kumar Selective disproporationation of toluene to produce benzene and P- Xylene.
Abdal- Kareem M.A. 2001 Dr. I.M. Mishra and Dr. Shri Chand Studies on extraction of aromatics from kerosene fraction.
S.M. Nanoti 2000 Dr. B.S. Rawat and Dr. I.M. Mishra Strategies for design and simulation of heat exchanger networks.
B.B. Gulyani 1999 Dr. B. Mohanty Boiling heat transfer from a vertical row of horizontal tubes.
Shalendra Kumar 1999 Dr. B. Mohanty and Dr. S.C. Gupta Modelling of UASB reactor.
Ram Pal Singh 1999 Dr. C.S.P .Ojha and Dr. S. Kumar Vehicular emission control: studies on non-noble metal based catalysts for co and propylene oxidation.
Anil Kumar Sharma 1999 Dr. I.M. Mishra and Dr. I.D. Mall .
C.B. Vijay Vittal 1999 Studies on the treatment of phenolic waste water using adsorption and immobilized whole cells.
Mahadeva Swamy M. 1998 Dr. I.M. Mishra, Dr. I.D. Mall and Dr. B. Prasad Studies on the operation and performance of UASB reactor for the treatment of distillery spent wash.
Suneeth Kumar S. M. 1998 Dr. I.M. Mishra and Dr. Desh Deepak .
Subodh Kumar S.S. 1998 Hydrogen separation from purge gas permeation optimal design and operating conditions.
Sanjiv Kumar Gupta 1996 Dr. S.N. Sinha .
Raj Kumar Vyas 1996 .
Amar S. Kadam 1995 Stuides of boiling heat transfer from plain and integral- fin tubes to binary and ternary liquid mixtures.
Abdul- Ameer Sahib Kadhum 1994 Dr. B.S. Varshney and Dr. B. Mohanty Mathematical modelling of blast furnace.
Shashi 1993 Dr. S.D. Bhattacharya and Dr. M.L. Kapoor .
Sattar Hussain 1993 Energy conservation in multiple effect evaporators.
Vijay Kumar Agarwal 1992 Dr. S.C. Gupta .
T.N.S. Mathur 1992 .
Basheshwar Prasad 1991 .
Ashok Kumar Gupta 1991 Studies of pool boiling heat transfer from a heating tube in horizontal and vertical orientations.
Jag Mohan Lal Gupta 1989 Dr. R. Prakash Development of a quasi- stationary flame front technique for the determination of steady flame spread rate of materials under the influence of external radiant heat flux.
Subodh Kumar Bhatnagar 1989 Dr. C.P. Agarwal and Dr. B. Mohanty Studies of the effect of conducting grade carbon black in some epoxy- glass composites.
Vipin Kumar 1989 Dr. Yogesh Chandra Studies in short tube multiple- effect sugarcane juice evaporators.
Amiya Kumar Ray 1989 Dr. B.S. Varshney and Dr. N.J. Rao Studies on the burning behavior of matal powder fires and their extinguishmen.
Tribhuvan Pati Sharma 1989 Dr. S. Kumar and Dr. B.S. Varshney .
Chaman Lal Verma 1987 .
Subodh Kumar Agarwal 1984 Liquid phase hydrogenation of olefins on supported palladium- alumina catalyst.
Ashok Kumar Gupta 1983 Dr. S.D. Bhattacharyya and Dr. S.K. Saraf .
S. Krishna Pandey 1993 Variable time step finite difference and approximate methods for parabolic moving boundary problems.
Dhirendra Kumar 1982 Dr. R.S. Gupta Some problems of wave propagation and instabilities in certain plasma configurations.
Sudhanshu 1982 Dr. S.N. Pandey Heat transfer studies in a vertical tube of closed- loop thermosiphon.
Chandra Prakash Agarwal 1980 Dr. S.S. Alam and Dr. N. Gopal Krishna .
M. Chandra Bansal 1980 .
Satish Chandra Gupta 1978 .
Yogesh Chandra 1978 .
Pershuram Sharma 1977 .
N. Prasad Shukla 1975 .
D. Kumar Bhardwaj 1975 .
N. Jagannath Rao 1974 .
Basu Dev Sharma 1974 .
S.S. Alam 1972